T.O.P. Racing "Photon" 1/10 EP Touring Car
#901
Tech Adept
Hi guys, do the hotbodies cyclone belts fit the photon? standard belts seem very tight soaked them in wd40 and they still seem extremly tight ran the car several times.
Thanks
Ricky
Thanks
Ricky
#903
Tech Adept
Hi there, thanks for the reply. yes the belt is on the loosest setting and stil feels like a guitar string. trying to stretch with cable ties leaving them locked up at night.
thanks
Ricky
thanks
Ricky
#905
180 degrees out of phase...
#906
#907
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
EJ's set-up from another site...
#908
Tech Champion
iTrader: (34)
Sorry, yep this is on med grip asphalt. I'll take your setup to the track and give it a go if the changes I've made dont work. The setup I'm going to try on the weekend is close to Josh's reedy setup, but a lower front rc (mid-down on the front hinge pins) and the shocks on the outside hole on the front arms. I'm also going to test the HPI pro linear springs which I've always found to be the best springs on asphalt
#909
Tech Elite
iTrader: (171)
Join Date: Sep 2003
Location: Brooklyn New York GO HARD OR GO HOME!!!!!!
Posts: 4,362
Trader Rating: 171 (100%+)
My photon made to Brooklyn at 8:45 am. Now its time to go to work Thank you T.O.P. USA for getting the kits out on time and to everybody.
#911
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
#913
Tech Adept
#914
All parts today arrived !
#915
My order is getting placed today ! Ceramic bearings... Balls... parts... MMM HMMM