2009 "IIC" Las Vegas International Indoor Championships
#1190
Tech Master
iTrader: (47)
If they default back to ROAR standard they would have to default back to the ROAR apporved motors. A stock and modified 12.5 rotor will be different. So the decision has to be made whether or not whether you have to run the motor as approved (and listed on the IIC site) or if you can run any 12.5 rotor or a rotor of any size.
.
.
But I do agree it should ONLY be allowed to run with what it was submitted and approved with.
#1191
#1192
Roar allows rotor's up too a 12.51mm as long as the shaft the magnet is mounted on is 7.25mm. ROAR dosen't limit it to what the motor was approved with. I emailed Dawn about this and that was the responce I got.
But I do agree it should ONLY be allowed to run with what it was submitted and approved with.
But I do agree it should ONLY be allowed to run with what it was submitted and approved with.
My main concern is that locally (and probably elsewhere) racers are treating the stock classes as if they are modified with turn limits. Modified 12.5 rotors (less than 7.25mm shaft) and rotors larger than 12.5 are commonly used.
#1193
Hi guys,
Motor rules are as follows: No hybrid motors. You cannot run a rotor from xyz company in a can from abc company. Maximum rotor size in 17.5,13.5,10.5 is 12.51mm.
Here are the full details of the rotor specs:
External shaft diameter must be 0.125inches (3.175mm). Only one piece, two pole Neodymium sintered, or Ferrite (Ceramic)magnetic rotors are permitted. The magnet length shall be 25.0 +/- 1.00mm not including any non-magnetic balancing material. The magnet outside diameter shall be
a maximum of 12.51 mm, no tolerance, for the entire length of the magnet. The shaft outside diameter, where the magnet is mounted, shall be 7.25 +/- 0.150mm for the entire length of the magnet. This dimension must be measurable without destroying
the rotor.
Fans: 1 fan with a maximum size of 31mm will be allowed on all cars.
Aftermarket heat sinks will be allowed to be run on motors.
These specs should be on the site very soon. The site will have its latest update soon.
I hope this helps everyone.
Thanks
Scotty
Motor rules are as follows: No hybrid motors. You cannot run a rotor from xyz company in a can from abc company. Maximum rotor size in 17.5,13.5,10.5 is 12.51mm.
Here are the full details of the rotor specs:
External shaft diameter must be 0.125inches (3.175mm). Only one piece, two pole Neodymium sintered, or Ferrite (Ceramic)magnetic rotors are permitted. The magnet length shall be 25.0 +/- 1.00mm not including any non-magnetic balancing material. The magnet outside diameter shall be
a maximum of 12.51 mm, no tolerance, for the entire length of the magnet. The shaft outside diameter, where the magnet is mounted, shall be 7.25 +/- 0.150mm for the entire length of the magnet. This dimension must be measurable without destroying
the rotor.
Fans: 1 fan with a maximum size of 31mm will be allowed on all cars.
Aftermarket heat sinks will be allowed to be run on motors.
These specs should be on the site very soon. The site will have its latest update soon.
I hope this helps everyone.
Thanks
Scotty
#1194
Tech Elite
iTrader: (1)
Hi guys,
Well another busy day in the world of IIC. Lots of phone calls and emails today as everyone is getting ready for another great event.
BJS227: yes there will be a hobbyshop on site for the event. Amp Draw Hobby from San Diego CA will be supporting the IIC again. They have been with us for now our 5th year and they will have everything you need.
GITSUM: yes the SMC Batteries are allowed as well as all the other manufactures that have production cells out.
KHADOR12: Moose and the guys have it correclty, you do need to get your tires at the event. We will have a specail price for them at the race.
ALDENTE: Why are you busting on Casey already. Doesn't this have to wait until at least the doors open on Monday?
STEVEAVES: Are you going to make it? let me know asap.
Tommorrow I will have another big announcement about another big name racer joining us for the IIC. Lets see if anybody can guess. Maybe there is a bonus lap in it for the first to guess?
Later
Scotty
Well another busy day in the world of IIC. Lots of phone calls and emails today as everyone is getting ready for another great event.
BJS227: yes there will be a hobbyshop on site for the event. Amp Draw Hobby from San Diego CA will be supporting the IIC again. They have been with us for now our 5th year and they will have everything you need.
GITSUM: yes the SMC Batteries are allowed as well as all the other manufactures that have production cells out.
KHADOR12: Moose and the guys have it correclty, you do need to get your tires at the event. We will have a specail price for them at the race.
ALDENTE: Why are you busting on Casey already. Doesn't this have to wait until at least the doors open on Monday?
STEVEAVES: Are you going to make it? let me know asap.
Tommorrow I will have another big announcement about another big name racer joining us for the IIC. Lets see if anybody can guess. Maybe there is a bonus lap in it for the first to guess?
Later
Scotty
Scotty was referring to the 50c 5200 they have out now specifically. Thanks!
#1196
17 days till i get on the plane
greetz,
Eric
#1197
#1198
#1199
JOHNNY: 1 Motor for the fan. ESC fan is also allowed.
Well the winner of the Bonus lap is..........................................
LUKE HOBSON FOR THE UK. WITH HIS BONUS LAP HE IS NOW TQ...... OF PRACTICE.
2009 Reedy Race of Champions Winner RONALD VOLKER will be joining us along with his Yokomo Team. It is going to be great to have Ronald here racing with us.
Thanks for playing along.
Scotty
Well the winner of the Bonus lap is..........................................
LUKE HOBSON FOR THE UK. WITH HIS BONUS LAP HE IS NOW TQ...... OF PRACTICE.
2009 Reedy Race of Champions Winner RONALD VOLKER will be joining us along with his Yokomo Team. It is going to be great to have Ronald here racing with us.
Thanks for playing along.
Scotty
#1200
Tech Initiate
yyyeeeeeeeaaahhh