Belt Sizes from Various Cars
|
|||
#16
#17
What about the Kyosho TF-5 SHIN or regular TF-5?? Can it fit the Xray T2 008
#18
HB Cyclone (169/62) (3.5mm)
HB Cyclone TC (170/63) (3.5mm)
Yokomo BD (172/63) (3.5mm)
Kyosho TF5 (149/74) (3.0mm)
TRF 415(169/59) (3.0mm)
TRF 416 (172/58) (3.0mm)
Xray T1/ T2 / 007 (169/60) (3.0mm)
Xray T2 008 (169/61) (3.0mm)
AE TC5 (172/63) (3.75mm)
RDX/Phi (169/62/70/71) (3.0mm)
Mi2/3 (171/60) (3.6mm)
S400 (167/59) (3.5mm)
#19
Another update
HB Cyclone (169/62) (3.5mm)
HB Cyclone TC (170/63) (3.5mm)
Yokomo BD (172/63) (3.5mm)
Kyosho TF5 (149/74) (3.0mm)
TRF 415(169/59) (3.0mm)
TRF 416 (172/58) (3.0mm)
Xray T1/ T2 / 007 (169/60) (3.0mm)
Xray T2 008 (169/61) (3.0mm)
AE TC5 (172/64) (3.75mm)
RDX/Phi (169/62/70/71) (3.0mm)
Mi2/3 (171/60) (3.6mm)
S400 (167/59) (3.5mm)
HB Cyclone (169/62) (3.5mm)
HB Cyclone TC (170/63) (3.5mm)
Yokomo BD (172/63) (3.5mm)
Kyosho TF5 (149/74) (3.0mm)
TRF 415(169/59) (3.0mm)
TRF 416 (172/58) (3.0mm)
Xray T1/ T2 / 007 (169/60) (3.0mm)
Xray T2 008 (169/61) (3.0mm)
AE TC5 (172/64) (3.75mm)
RDX/Phi (169/62/70/71) (3.0mm)
Mi2/3 (171/60) (3.6mm)
S400 (167/59) (3.5mm)
#20
The Cyclone belts are 3.0mm wide.
#21
whats up everyone the Robotronics Avid is 185T/62T
#22
another update
HB Cyclone (169/62) (3.0mm)
HB Cyclone TC (170/63) (3.25mm)
Yokomo BD (172/63) (3.0mm)
Kyosho TF5 (149/74) (3.0mm)
TRF 415(169/59) (3.0mm)
TRF 416 (172/58) (3.0mm)
Xray T1/ T2 / 007 (169/60) (3.0mm)
Xray T2 008 (169/61) (3.0mm)
AE TC5 (172/64) (3.5mm)
RDX/Phi (169/62/70/71) (3.0mm)
Mi2/3 (171/60) (3.6mm)
S400 (167/59) (3.5mm)
Robitronics Avid (185/62) (3.00mm)
HB Cyclone (169/62) (3.0mm)
HB Cyclone TC (170/63) (3.25mm)
Yokomo BD (172/63) (3.0mm)
Kyosho TF5 (149/74) (3.0mm)
TRF 415(169/59) (3.0mm)
TRF 416 (172/58) (3.0mm)
Xray T1/ T2 / 007 (169/60) (3.0mm)
Xray T2 008 (169/61) (3.0mm)
AE TC5 (172/64) (3.5mm)
RDX/Phi (169/62/70/71) (3.0mm)
Mi2/3 (171/60) (3.6mm)
S400 (167/59) (3.5mm)
Robitronics Avid (185/62) (3.00mm)
#24
HB Cyclone (169/62) (3.0mm)
HB Cyclone TC (170/63) (3.25mm)
Yokomo BD (172/63) (3.0mm)
Kyosho TF5 (149/74) (3.0mm)
TRF 415(169/59) (3.0mm)
TRF 416 (172/58) (3.0mm)
Xray T1/ T2 / 007 (169/60) (3.0mm)
Xray T2 008 (169/61) (3.0mm)
AE TC5 (172/64) (3.5mm)
RDX/Phi (169/62/70/71) (3.0mm)
Mi2/3 (171/60) (3.6mm)
S400 (167/59) (3.5mm)
Robitronics Avid (185/62) (3.00mm)
TOP Racing Scythe 15/33t pulleys (130/94 ) (3mm)
HB Cyclone TC (170/63) (3.25mm)
Yokomo BD (172/63) (3.0mm)
Kyosho TF5 (149/74) (3.0mm)
TRF 415(169/59) (3.0mm)
TRF 416 (172/58) (3.0mm)
Xray T1/ T2 / 007 (169/60) (3.0mm)
Xray T2 008 (169/61) (3.0mm)
AE TC5 (172/64) (3.5mm)
RDX/Phi (169/62/70/71) (3.0mm)
Mi2/3 (171/60) (3.6mm)
S400 (167/59) (3.5mm)
Robitronics Avid (185/62) (3.00mm)
TOP Racing Scythe 15/33t pulleys (130/94 ) (3mm)
#26
These 3mm pitch belts are not just used on RC cars. There are suppliers you can buy directly from. I don't know of any off hand but a little online research should find a parts house.
#27
The belt manufacturers like bando and mitsuboshi, they sell their belts by 1 sleeve. 1 sleeve can be cut into 70 to 90 belts, depending on the width you want to be cut. The retailer have the cutting machine.
If you have group of friends willing to buy 5 belts at once, you'll be surprice each belt only cost you few dollars.
Most RC belts are coded S3M XXX, S3M means 3mm pitch, and XXX means the total length of belt in mm. Divide the length ( XXX) by 3, and you get the number of teeth.
If you have group of friends willing to buy 5 belts at once, you'll be surprice each belt only cost you few dollars.
Most RC belts are coded S3M XXX, S3M means 3mm pitch, and XXX means the total length of belt in mm. Divide the length ( XXX) by 3, and you get the number of teeth.
#28
Super Moderator
iTrader: (239)
The belt manufacturers like bando and mitsuboshi, they sell their belts by 1 sleeve. 1 sleeve can be cut into 70 to 90 belts, depending on the width you want to be cut. The retailer have the cutting machine.
If you have group of friends willing to buy 5 belts at once, you'll be surprice each belt only cost you few dollars.
Most RC belts are coded S3M XXX, S3M means 3mm pitch, and XXX means the total length of belt in mm. Divide the length ( XXX) by 3, and you get the number of teeth.
If you have group of friends willing to buy 5 belts at once, you'll be surprice each belt only cost you few dollars.
Most RC belts are coded S3M XXX, S3M means 3mm pitch, and XXX means the total length of belt in mm. Divide the length ( XXX) by 3, and you get the number of teeth.
Here is where I get my belts from
http://www.gatespowerpro.com/Comerge...TOKEN=68572846
#29
Here is where I get my belts from
http://www.gatespowerpro.com/Comerge...TOKEN=68572846
http://www.gatespowerpro.com/Comerge...TOKEN=68572846
I live outside USA...... The last time I contact Gates was Gates's distributor in my country, the sales lady wanted me to buy 1 sleeve
#30