Touring Car Setup - info foam on asphalt ?
#31
#32
4mm... eish..lol
so u ran bedford... thats a funky track man... im glad i gave it a skip...
im getting ready for the k90 nats... what class did you run...
tamiya 415. ok...
did you break any thing on the car yesterday
so u ran bedford... thats a funky track man... im glad i gave it a skip...
im getting ready for the k90 nats... what class did you run...
tamiya 415. ok...
did you break any thing on the car yesterday
#33
well there isnt a fixed size i like to run...
usually the rears are slightly bigger before the run.. and after its slightly
smaller.
with 38 front 35 rear i see a big diff in the wear.. but with 35sh all round
it isnt that bad...
my last race i rac 35 all round... was much better.. but the previous week the 38 front work good... depends on the traction on the day i suppose..
i like to run the car a bit soft... i found i was battling using the stiffer setup the other chaps use...
im busy tinkering more with the roll centers toget more corner speed...
usually the rears are slightly bigger before the run.. and after its slightly
smaller.
with 38 front 35 rear i see a big diff in the wear.. but with 35sh all round
it isnt that bad...
my last race i rac 35 all round... was much better.. but the previous week the 38 front work good... depends on the traction on the day i suppose..
i like to run the car a bit soft... i found i was battling using the stiffer setup the other chaps use...
im busy tinkering more with the roll centers toget more corner speed...
#34
Tech Adept
Hey
Run 32sh all round, should be good place for good steering and good rear grip..
Also whats the story with this Vadaz oke in SA ?, word over here in AUS is that he's some porno star?
Later
Run 32sh all round, should be good place for good steering and good rear grip..
Also whats the story with this Vadaz oke in SA ?, word over here in AUS is that he's some porno star?
Later
#35
So as a result, I don't know if you apply the additive first, or the suntan lotion, logic would tell me to apply the additive first, or it won't be "sealed in" by the suntan lotion.
hope that helps
#36
Tech Adept
Suntan lotion was the hot ticket when 235mm pan cars were running on asphalt, just apply, let it dry and then wipe it off..
#37
where u from dude... sounds like i know you ?
u in aus ? looks like vadaz got a "Large" fan bas hahahaha
#38
Tech Adept
Where you guyz know me from in OZ?
I am in SA, and at least get the name right, especially you Megz
See you track side sunday for the Pre-Nats, 11 sec laps May be
#39
hey team driver hahahah
looks like u r famous......
"VADAZ" hey i didnt spell it like this...hehehehe
so what porn movie u stared in ?
11 sec laps@!#!@#$$
so how did the bedford race finish... what position u come ?"CUM" heheheheh
looks like u r famous......
"VADAZ" hey i didnt spell it like this...hehehehe
so what porn movie u stared in ?
11 sec laps@!#!@#$$
so how did the bedford race finish... what position u come ?"CUM" heheheheh
#40
Tech Adept
That's not how you spell my name
No movies for me thanks
No movies for me thanks
#41
Tech Rookie
Yawww!!, check Vada"s"z has a fan base!..
The day Vadasz does an 11 sec lap at k90, is the day i stop racing, and i'm not talking about "suspicious" 11 sec lap by cutting the horse shoe out!..
The day Vadasz does an 11 sec lap at k90, is the day i stop racing, and i'm not talking about "suspicious" 11 sec lap by cutting the horse shoe out!..
#42
BWAHAHAHAHAHAHA We should start a fansite!
#43
yoh... stop it now chaps.. dont be nasty...
#44
I ran Open stock... came 3rd just after Danie 2nd and Sage 1st
Also took 3rd in 1/12th mod with Johnathan 2nd, dunno who was 1st
Great day
#45
ahhh....hmmm u the oke with the SStock motor in 1/12