g12314

iTrader: (6)

Goop,

Just wanted to say thanks for the KO setup you had given me. Took 2nd this weekend at the Hobbyplex TCS race and clearly had the fastest car on the track. Just didnt have that little bit of luck needed to put it on the top of the podium.

Time to send it in for the 1.5 update now.

Thanks,
Jimmy

bjspinner

iTrader: (22)

Which one of Goop's setups did you use?

goop

iTrader: (2)

he was using one of my older setups for the BMC v.1.0 so he only had 2 timing

bjspinner

iTrader: (22)

Hey Goop have you got a setup for 10.5 with the new version speedy ver 1.5.

I have had a look at some settings where should I start as I am yet to get this on the track at this stage.

goop

iTrader: (2)

try this one

KO PROPO Staff

Replacement fans are available. The part number is 45523. You can also purchase them here http://www.shopatron.com/product/par...052.1057.0.0.0

KO PROPO Staff

They have been pushed back due to the BMC v1.5. No ETA when they will be available.

bjspinner

iTrader: (22)

Thanks Goop I have put that in but how do you get the figure 63 it only goes up to 52 in my programing on the pc?

I put it in as high a figure as I could will that be ok.

Could you maybe please explain it a bit more to me, and what to expect from these settings over a slower rising curve in the settings.

PM if you like.

Thanks for your help

KO PROPO Staff

Open the file with the PC software.

bjspinner

iTrader: (22)

I must be stupid

I don't know what you mean, Goops file is a text file am I suposed to open it with the BMC manager?

Or do I read the values from the txt file and put them in the freq boxes in the BMC manager.

I have the programs from KO America, do you have a recomended profile for10.5 from that site.

theisgroup

iTrader: (10)

rename the file to a .kpd file and then you can open it with the bmc manager or stock motor manager. the board will only take certain files, so for anyone that wants to post bmc profiles, they need to change the extension of the file to a txt.

bjspinner

iTrader: (22)

At the high possibility of sounding stupid HOW.

I tried to re-name the file, but not 100% sure how.Showing my age here.

I just might be getting dementure.

theisgroup

iTrader: (10)

so you find the file you downloaded and then right click on the file and then select rename. delete the .txt and replace with .kpd

the other thing you can do is open the bmc manager or stock motor manager and click the folder icon and then click the down arrow next to the text box for "files of type:" and then select *.*

bjspinner

iTrader: (22)

Thanks Yang you have been a great help.I think I am now sorted.

This is a very helpful thread

Thanks all.

theisgroup

iTrader: (10)

just trying to give back. you should have seen how much time Robert put in to help me with my radio issues last year in Vegas. Even though I was a nobody. just can't beat the service.