Yeah, I would be interested in the new version of the SV10 2. I still have the original with lots of mods... I got the narrow chassis, the composite bulkheads, all the aluminum stuff...and the car is awesome. I've heard the new version is quite an improvement.:weird:
My setup is : Front camber 1.0 degrees toe out 0.5 Integy Green springs with 60wt oil Caster setting all the way forward Upper roll center mount Forward hole on the Knuckle Rear Camber 1.5 degrees Stock rear toe Inner lower shock mount Integy Yellow springs with 60wt oil Antisquat all the way back Yokomo 5G Belted tires Yokomo Firm inserts front Medium inserts rear Yokom 10 spoke 6mm offset wheels ( allows max width) Also took off the stock front body mounts and relocated HPI body mounts on the front bumper. |
hehe the new version is very very stiff a chasis no good on parking lot racing where the surface might be bumpy ... but on carpet and smooth surface :p it rocks !
|
*I didn't realize this was such an old thread. Somehow it showed up in a recent feed....
I used to have an SV10 BITD. The folks who I used for parts were back in Massachusetts I think. I'd love to see more Kawada support in the US. It's tough when the touring car market is so flooded with cars. I've since started racing VBC, but I would consider another Kawada if US support was decent. Momo |
All times are GMT -7. It is currently 04:40 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.