What is new at KT Hobbies
08-08-2002, 05:19 PM
#46
Just wanted to let everyone know that the remaining Nitro Shoes from Jaco have arrived. Also wanted to mention the return of the new 2.0 Stratus. We are expecting 1/12th scale bodies any day now.
Don't forget about our giveaway of the new Associated Pit Bag. All you have to do to enter is place an order. For those of you that have already ordered this month don't worry because you are already entered.
Thank you,
Kraig O'Brien
KT Hobbies, Owner
Don't forget about our giveaway of the new Associated Pit Bag. All you have to do to enter is place an order. For those of you that have already ordered this month don't worry because you are already entered.
Thank you,
Kraig O'Brien
KT Hobbies, Owner
08-12-2002, 04:05 AM
#47
Kraig - Don't worry about holding the switchblade for me as posted on the 1/12th thread. I won't be intrested in purchasing until the end of the year, however if you could post an approximate price I would greatly appreciate it.
Also, do you have, or are you able to get S3000HVXM-6, Promatch factory team 6 cell 3000 HV's. The reason I ask is that Promatch do not sell outside the US and I'm very keen to get hold of some of these packs. I believe their is a two pack limit on those cells. Thanks for any help you can provide.
Also, do you have, or are you able to get S3000HVXM-6, Promatch factory team 6 cell 3000 HV's. The reason I ask is that Promatch do not sell outside the US and I'm very keen to get hold of some of these packs. I believe their is a two pack limit on those cells. Thanks for any help you can provide.
08-12-2002, 04:26 AM
#48
Originally posted by Rowdy
Kraig - Don't worry about holding the switchblade for me as posted on the 1/12th thread. I won't be intrested in purchasing until the end of the year, however if you could post an approximate price I would greatly appreciate it.
Also, do you have, or are you able to get S3000HVXM-6, Promatch factory team 6 cell 3000 HV's. The reason I ask is that Promatch do not sell outside the US and I'm very keen to get hold of some of these packs. I believe their is a two pack limit on those cells. Thanks for any help you can provide.
Kraig - Don't worry about holding the switchblade for me as posted on the 1/12th thread. I won't be intrested in purchasing until the end of the year, however if you could post an approximate price I would greatly appreciate it.
Also, do you have, or are you able to get S3000HVXM-6, Promatch factory team 6 cell 3000 HV's. The reason I ask is that Promatch do not sell outside the US and I'm very keen to get hold of some of these packs. I believe their is a two pack limit on those cells. Thanks for any help you can provide.
08-13-2002, 03:48 AM
#50
Originally posted by Kraig
Rowdy and Opel, I will send you an email or p.m. when I get all the information together.
Rowdy and Opel, I will send you an email or p.m. when I get all the information together.
08-13-2002, 07:03 AM
#51
I missed his return call yesterday so I will be calling him in the morning. The time zone differences made a mess of things. I will let you guys know as soon as I know.
On another note, we have received in some of the new battery chargers from LRP. The Pulsar is a very versatile charger for its compact size.
We have some of the Protoform and Parma 1/12th scale bodies. We have in stock the Speed 8 from Parma and the Bently Speed 8. Both bodies come in the lite weight versions.
When you purchase 3000 mah cells I would recommend picking up the new Speed Jig from Deans. They have changed the original configuration so that it will now accept the new cells. Those are also available on the Battery page.
Kraig O'Brien
KT Hobbies
On another note, we have received in some of the new battery chargers from LRP. The Pulsar is a very versatile charger for its compact size.
We have some of the Protoform and Parma 1/12th scale bodies. We have in stock the Speed 8 from Parma and the Bently Speed 8. Both bodies come in the lite weight versions.
When you purchase 3000 mah cells I would recommend picking up the new Speed Jig from Deans. They have changed the original configuration so that it will now accept the new cells. Those are also available on the Battery page.
Kraig O'Brien
KT Hobbies
08-15-2002, 11:47 AM
#53
Hi everyone. Just thought I would mention a couple of more items we just got in.
1. Sanyo 50 mah 5 cell receiver packs. These are preassembled packs with black shrink wrap over them. They also have a connector for you to plug into the receiver. These are pefect for 1/12th scale and 4 cell applications.
2. We have received in 6 cell battery cases. This is a hard case that will allow you to protect your batteries when they are not in use.
3. We also got in more Brush Serrators
4. Jaco Sedan Foams are in stock, such as purple, double purple, orange/purple. We also have the Jaco Nitro Shoes in stock.
5. TRC Sedan Foams are in stock as well. We have Purple, D. Purple, Magenta's, and Plaids.
6. We have slashed the prices on our TC3 Graphite Arms. These are the one hole versions of the arms.
Don't forget about the 1/12th scale bodies and the new Protoform Stratus bodies.
Kraig O'Brien
1. Sanyo 50 mah 5 cell receiver packs. These are preassembled packs with black shrink wrap over them. They also have a connector for you to plug into the receiver. These are pefect for 1/12th scale and 4 cell applications.
2. We have received in 6 cell battery cases. This is a hard case that will allow you to protect your batteries when they are not in use.
3. We also got in more Brush Serrators
4. Jaco Sedan Foams are in stock, such as purple, double purple, orange/purple. We also have the Jaco Nitro Shoes in stock.
5. TRC Sedan Foams are in stock as well. We have Purple, D. Purple, Magenta's, and Plaids.
6. We have slashed the prices on our TC3 Graphite Arms. These are the one hole versions of the arms.
Don't forget about the 1/12th scale bodies and the new Protoform Stratus bodies.
Kraig O'Brien
08-17-2002, 11:35 AM
#54
Thanks for the great service
Kraig,
I just got the 1/12th and 1/10th scale Frewer Holden bodies. Thanks for locating the Frewers for me and as always the great customer service!
Best regards,
F1-Fanatic
P.S. Thanks for sponsoring the painting contest and for the free body.
I just got the 1/12th and 1/10th scale Frewer Holden bodies. Thanks for locating the Frewers for me and as always the great customer service!
Best regards,
F1-Fanatic
P.S. Thanks for sponsoring the painting contest and for the free body.
08-18-2002, 09:00 PM
#55
F1-Fanatic, no problem! Glad you enjoyed the contest and enjoyed the bodies.
Speaking of contest, don't forget we are giving away a Team Associated Pit Bag. You can see a picture of it on our front page. All you have to do to enter is place an order. We will announce the winner at the beginning of next month.
Also, don't forget we have in stock the LRP Pulsar Battery Charger. This little unit will run your motors, discharge your batteries, and charge your batteries. It will restart the charge incase your power was accidently disconnected while it was charging that battery you had saved for the A-main!
Through a special purchase with Pro Match Batteries we have been able to offer to you rock bottom prices on Panasonic Ultra Metal Hydride Batteries. They are too low to list here but once our supply of them is gone so will the prices.
Speaking of contest, don't forget we are giving away a Team Associated Pit Bag. You can see a picture of it on our front page. All you have to do to enter is place an order. We will announce the winner at the beginning of next month.
Also, don't forget we have in stock the LRP Pulsar Battery Charger. This little unit will run your motors, discharge your batteries, and charge your batteries. It will restart the charge incase your power was accidently disconnected while it was charging that battery you had saved for the A-main!
Through a special purchase with Pro Match Batteries we have been able to offer to you rock bottom prices on Panasonic Ultra Metal Hydride Batteries. They are too low to list here but once our supply of them is gone so will the prices.
08-29-2002, 03:51 PM
#56
Hi everyone! Just thought I would take a couple of moments to inform everyone as to what is new so far this week.
We have in stock both Jaco and TRC foam tires for the 1/12th scale cars.
Tribo is also back in stock.
That is about all for right now. Thank you for looking.
Oh don't forget one lucky customer will win the new Pit Bag from Team Associated.
We have in stock both Jaco and TRC foam tires for the 1/12th scale cars.
Tribo is also back in stock.
That is about all for right now. Thank you for looking.
Oh don't forget one lucky customer will win the new Pit Bag from Team Associated.
09-04-2002, 07:01 PM
#57
Hi everyone, hope you had a safe holiday weekend!
We have updated the website with a bunch of items that are back in stock. Such as Rubber Tires, Foam Tires, Wheels, Brushes, Sedan Bodies, 1/12th Scale Bodies and Car Parts. I am sure I am forgetting something.
We are currently running a closeout of the Ultra Metal Hydride Cells from Pro Match. We also have some of those 50 mah receiver packs on sale. These work especially well in 4 cell oval and in 1/12th scale.
I do ask that you refresh your pages as we do keep on top of the items that are in stock and items that are out of stock.
Just so everyone knows, we will be closed this Thursday. We will still process internet orders. I am headed to Chicago for the show. I am taking my camera with me so hopefully I will be able to get some pictures of some cool stuff.
We have updated the website with a bunch of items that are back in stock. Such as Rubber Tires, Foam Tires, Wheels, Brushes, Sedan Bodies, 1/12th Scale Bodies and Car Parts. I am sure I am forgetting something.
We are currently running a closeout of the Ultra Metal Hydride Cells from Pro Match. We also have some of those 50 mah receiver packs on sale. These work especially well in 4 cell oval and in 1/12th scale.
I do ask that you refresh your pages as we do keep on top of the items that are in stock and items that are out of stock.
Just so everyone knows, we will be closed this Thursday. We will still process internet orders. I am headed to Chicago for the show. I am taking my camera with me so hopefully I will be able to get some pictures of some cool stuff.
09-13-2002, 08:54 AM
#58
Hi everyone! Hope everything is going good for you. It is that time again to keep you informed as to what is going on. So lets get started.
1. We have changed the colors on the website so it should make for easier viewing so stop on by and give us your opinion.
2. We have added some new products on the front page of the site. I think you will like them, FTTC3, Quantum, LRP Pulsar Charger and we are taking pre-orders on the XXX-S Graphite Plus Kits. Order today and save on shipping charges.
3. Starting last Monday we are offering free ground shipping on orders over $100.00 for U.S. based orders.
4. Almost forgot, we have in stock the new 2 hole lower front and rear arms for the TC3 in Graphite.
That is about all I can think of right now. Hope you have a good and safe weekend!
Kraig O'Brien
KT Hobbies.com
1. We have changed the colors on the website so it should make for easier viewing so stop on by and give us your opinion.
2. We have added some new products on the front page of the site. I think you will like them, FTTC3, Quantum, LRP Pulsar Charger and we are taking pre-orders on the XXX-S Graphite Plus Kits. Order today and save on shipping charges.
3. Starting last Monday we are offering free ground shipping on orders over $100.00 for U.S. based orders.
4. Almost forgot, we have in stock the new 2 hole lower front and rear arms for the TC3 in Graphite.
That is about all I can think of right now. Hope you have a good and safe weekend!
Kraig O'Brien
KT Hobbies.com
Last edited by Kraig; 09-13-2002 at 09:04 AM.
09-13-2002, 05:54 PM
#59
Hope you come out and race this weekend there Mr. shop owner guy
09-13-2002, 06:35 PM
#60
Boy I sure would like to but I have to baby sit this Sunday. We might take a trip though as they can sleep in the car.
I do have some other things that I want to mention.
1. TRC Plaids are back in stock, still using the black mesh/spoke wheels.
2. TRC Cyan are in stock. I have to get them up on the site yet but that is tonight's project.
3. The tuning guide that both Martin Crisp and XXX-Main have put together are in stock. That should be on the front page by tomorrow.
4. RPM TC3 Front Bumpers in both blue and black.
5. Team Sorex 40R compound is back in stock.
6. The TRC Magenta's are on the new yellow dish wheels from Trinity. Amazingly the box says made in Italy by GRP for TRC Trinity. Just thought I would throw that in there. Oh yeah, they are in stock as well.
Well I better get to work.
Kraig O'Brien
KT Hobbies.com
I do have some other things that I want to mention.
1. TRC Plaids are back in stock, still using the black mesh/spoke wheels.
2. TRC Cyan are in stock. I have to get them up on the site yet but that is tonight's project.
3. The tuning guide that both Martin Crisp and XXX-Main have put together are in stock. That should be on the front page by tomorrow.
4. RPM TC3 Front Bumpers in both blue and black.
5. Team Sorex 40R compound is back in stock.
6. The TRC Magenta's are on the new yellow dish wheels from Trinity. Amazingly the box says made in Italy by GRP for TRC Trinity. Just thought I would throw that in there. Oh yeah, they are in stock as well.
Well I better get to work.
Kraig O'Brien
KT Hobbies.com
