DustinFalk

Hi guys
Can someone tell which bearings i need for a complete bearing set of the EVO?

Dustin

bertrandsv87

iTrader: (2)

You will want the best ceramic bearing set from Acer Racing(#AW01) $67.50..... Can't go wrong there....

DustinFalk

Thanks but i came from
Germany and a local bearing producer want to make a ceramic bearing set for drivers in germany ...
for this i need the measures and numbers of all bearings :-)

bertrandsv87

iTrader: (2)

According to my notes, the bearing sizes are:
6x10x3mm , 4x8x3mm, 5x8x2mm(diff), 4x7x2.5mm(diff)...

SLOWINSLOWOUT

iTrader: (20)

Another diff question, does anyone bother setting the pinion depth? (run a pattern with marking paste) and how much backlash should I set?

trackout

?? What does this have to do with the Awesomatix?

Boomer

advertising/spam thread. Reported.

Clegg

iTrader: (9)

Cleaned up the offending post

ropezz

Sorry for the bother, i made a mystake posting.

Losi22

iTrader: (67)

I bought an ffg while in Vegas from hanulec. DO you have to run the alum chassis for it to be effective? I am going to run it in 13.5 or mod.

Magnet Top

iTrader: (4)

The FFG is effective with the standard carbon fiber "L" chassis and all alloy versions too. ( all chassis options )

Jake D.

Stogie

iTrader: (2)

Love the product... but 9.5mm? Seriously?!?

This really pisses me off.

SLOWINSLOWOUT

iTrader: (20)

3/8ths....

SLOWINSLOWOUT

iTrader: (20)

If I want to run a bit of reactive caster in the front, would I remove say 0.5 from the front and add the same to the rear, to maintain the same roll center?

Stogie

iTrader: (2)

Seriously, though. How does something designed and produced in all metric measurements end up with this lone 3/8ths fitting? If it would have been too brittle slimmed down to 9mm, beefed up to 10mm would have worked. Grrrr.....