Awesomatix EP Touring Car (A700 Shaft Drive)
#6691
Tech Adept
Hi
there was a post from Max a few pages back to not to use the big washer's behind the the big gears but the two small one's included in the Sheperd Gear kit.
Claude
there was a post from Max a few pages back to not to use the big washer's behind the the big gears but the two small one's included in the Sheperd Gear kit.
Claude
#6693
#6694
R/C Tech Elite Member
iTrader: (28)
Ran the FCB yesterday at Jackson RC. Our track has curbs that are painted. No TQ this week after flipping in Q1 and Q3 on the curbs after being on some super fast runs. The flipping on the curbs is getting old so I'm going to work dampener setups in the next 1-3 weeks.
I tried three different configs--
#1 4 deg caster at rest + rear flex to 6 deg caster (ran in q1) - 0.1s faster/lap than competition
#2 4 deg caster at rest + rear flex to 6 deg caster + front flex to 2 deg caster (ran in q2) - 0.1s slower/lap than competition
#3 fixed 4 def of caster (ran in q3 and main) - 0.2s faster/lap than competition in qualifying -- due to Q2 only 0.1s faster in main but the pace was back
I believe config #1 will work well on a asphalt track without curbs. It had a great overall feel... And led me to believe I could drive the curbs harder (I was wrong).
Unfortunately lap times done lie. In q3 I did two 15.7 laps up front and was on a faster than mod time - quick 23 lap run.
I tried three different configs--
#1 4 deg caster at rest + rear flex to 6 deg caster (ran in q1) - 0.1s faster/lap than competition
#2 4 deg caster at rest + rear flex to 6 deg caster + front flex to 2 deg caster (ran in q2) - 0.1s slower/lap than competition
#3 fixed 4 def of caster (ran in q3 and main) - 0.2s faster/lap than competition in qualifying -- due to Q2 only 0.1s faster in main but the pace was back
I believe config #1 will work well on a asphalt track without curbs. It had a great overall feel... And led me to believe I could drive the curbs harder (I was wrong).
Unfortunately lap times done lie. In q3 I did two 15.7 laps up front and was on a faster than mod time - quick 23 lap run.
#6695
R/C Tech Elite Member
iTrader: (28)
Never tried
After running many different front drive shafts in XRay or top cars in the last 6 years I'm happy with the awesomatix drive shafts. The worst thing that happens is a bent bone (st13 or st14). This is a MAJOR difference than a broken bone!
The quote you reference talks about st02 -- the rear drive shaft / CVD stub axle.
After running many different front drive shafts in XRay or top cars in the last 6 years I'm happy with the awesomatix drive shafts. The worst thing that happens is a bent bone (st13 or st14). This is a MAJOR difference than a broken bone!
The quote you reference talks about st02 -- the rear drive shaft / CVD stub axle.
#6697
Hi there,
now that the ETS is over, I hope Oleg can answer my few questions:
Many thanks for answering,
Best regards,
G-rem
now that the ETS is over, I hope Oleg can answer my few questions:
Best regards,
G-rem
#6698
Tech Adept
Looking forward to IIC in a few months, just ordered my second EVO and starting to ramp up my parts inventory over the next few months. Are there plans for A700 parts to be available for sale at IIC? Awesomatix zone in the pit area? Private lounge area with free Beer for A700 drivers?
#6699
R/C Tech Elite Member
iTrader: (28)
Looking forward to IIC in a few months, just ordered my second EVO and starting to ramp up my parts inventory over the next few months. Are there plans for A700 parts to be available for sale at IIC? Awesomatix zone in the pit area? Private lounge area with free Beer for A700 drivers?
Pit spots - maybe/TBD
Parties - likely. If we win, bail $$ available
#6703
#6704
Tech Master
iTrader: (44)
Thanks !
I have attached my set up for mod. This has been the best and most consistant the car has been all year. My main issue was that the car would get tighter than I liked and it was easier to over drive the car that way. Moving the battery back helped but taking out the rear angle in the lower arm seemed to help the most. I think I lost a little grip when the sun came out for a long period by the main by doing this.
In 17.5 I ran the Hanulec/Fairtrance set up 100%.
Monti
#6705
Yes Andrew decided to not tighten his pinion. I feel I was a third place car but got a little lucky.
Thanks !
I have attached my set up for mod. This has been the best and most consistant the car has been all year. My main issue was that the car would get tighter than I liked and it was easier to over drive the car that way. Moving the battery back helped but taking out the rear angle in the lower arm seemed to help the most. I think I lost a little grip when the sun came out for a long period by the main by doing this.
In 17.5 I ran the Hanulec/Fairtrance set up 100%.
Monti
Thanks !
I have attached my set up for mod. This has been the best and most consistant the car has been all year. My main issue was that the car would get tighter than I liked and it was easier to over drive the car that way. Moving the battery back helped but taking out the rear angle in the lower arm seemed to help the most. I think I lost a little grip when the sun came out for a long period by the main by doing this.
In 17.5 I ran the Hanulec/Fairtrance set up 100%.
Monti