96LikesAwesomatix EP Touring Car (A700 Shaft Drive)
05-01-2014, 07:23 PM
#6301
Originally Posted by OVA
Where and what is caster flex?? something new to me lol
in the future we will have a production version of a part that some team drivers have been running -- the flexible caster block. it allows the metal am06 to behave more like a plastic c-hub.
05-01-2014, 07:26 PM
#6302
Originally Posted by OVA
Where and what is caster flex?? something new to me lol
05-01-2014, 10:17 PM
#6304
Originally Posted by hanulec
for most everyone, it is a mistake in their setup sheet
in the future we will have a production version of a part that some team drivers have been running -- the flexible caster block. it allows the metal am06 to behave more like a plastic c-hub.
in the future we will have a production version of a part that some team drivers have been running -- the flexible caster block. it allows the metal am06 to behave more like a plastic c-hub.
05-01-2014, 10:18 PM
#6305
Originally Posted by geeunit1014
Its basically a block that allows the upper arm to flex.. Check out the Awesomatix FB page, there is a video of it on there
05-02-2014, 08:20 AM
#6306
any help on the ride height question i asked a page back?
05-02-2014, 08:30 AM
#6307
Originally Posted by dragonracing
any help on the ride height question i asked a page back?
I never run the front higher than the rear. Usually the opposite or flat.
3mm of droop seems high to me but its really hard to say, tires, traction, setup, there are many factors that are deciders in setting droop and ride height.
Sorry if this does not answer your questions specifically but not knowing anything about the track or your setup thats about as good as I can do.
05-02-2014, 10:01 AM
#6308
Originally Posted by hanulec
for most everyone, it is a mistake in their setup sheet
in the future we will have a production version of a part that some team drivers have been running -- the flexible caster block. it allows the metal am06 to behave more like a plastic c-hub.
in the future we will have a production version of a part that some team drivers have been running -- the flexible caster block. it allows the metal am06 to behave more like a plastic c-hub.
Are you saying Kyle didn't run caster flex? Just trying to get all the setup info
05-02-2014, 11:40 AM
#6310
Originally Posted by L.Fairtrace
Ride height is relative to many things. I would say between 5.5 and 6mm ride height front and rear is normal unless the track is super bumpy or something.
I never run the front higher than the rear. Usually the opposite or flat.
3mm of droop seems high to me but its really hard to say, tires, traction, setup, there are many factors that are deciders in setting droop and ride height.
Sorry if this does not answer your questions specifically but not knowing anything about the track or your setup thats about as good as I can do.
I never run the front higher than the rear. Usually the opposite or flat.
3mm of droop seems high to me but its really hard to say, tires, traction, setup, there are many factors that are deciders in setting droop and ride height.
Sorry if this does not answer your questions specifically but not knowing anything about the track or your setup thats about as good as I can do.
05-02-2014, 12:35 PM
#6311
Originally Posted by dragonracing
it does help. a bit. ill find out what the track is like sunday. from memory its fairly smooth. i set my car up to 6mm front and 6.5 rear. ill bring it back down to 5.5 and go from there. and i never run higher in front also. my setup is posted on the A setup page under jaybee. its his old car i just bought. works well on carpet. will see how it is on asphalt.
you may want to cut your top deck like what Mike Hanulec did ...I think he call the T shape top deck..
Last edited by OVA; 05-02-2014 at 10:40 PM.
05-02-2014, 01:00 PM
#6312
thanks. top deck allready cut by jaybee. and i have multiple top decks to play with. ill leave my ride height at 6.mm/6.5mm f/r respectively. now if the weather holds out for us.
05-03-2014, 03:40 AM
#6314
latest stock order on the way in guys. just got tracking #s
05-03-2014, 09:34 AM
#6315
Tech Addict
Are there kits coming in on this order including USA Versions and EVOs?
