Awesomatix EP Touring Car (A700 Shaft Drive)
#5210
Tech Lord
iTrader: (32)
I raced my Evo last night in 17.5 on carpet and blasted my fastest times previously set with the T4'14 by like 5 seconds in quals and the main. I was driving safe and easy due to a very difficult layout and was able to TQ every round and win the main. None of this should be a surprise by now. I think the word is out that this car is faster than everything else in stock racing. But in case someone was still wondering, that continues to be true with the Evo so far in my testing.
#5211
R/C Tech Elite Member
iTrader: (28)
Inventories might appear limited right now -- but there are many orders in line / in flight with Oleg for every country/distributor! Oleg is doing is absolute best to get the new products (and parts..) shipped out.
If you want an A700 Evo, A700L, or FFG I'd recommend back ordering these items ASAP. The longer you wait to order, the longer you'll be inline. At the current rate of demand, I wouldn't be surprised to see very tight inventories until mid-February. If you need something else --- reach out to your local dealer / distributor....
If you want an A700 Evo, A700L, or FFG I'd recommend back ordering these items ASAP. The longer you wait to order, the longer you'll be inline. At the current rate of demand, I wouldn't be surprised to see very tight inventories until mid-February. If you need something else --- reach out to your local dealer / distributor....
#5212
Tech Fanatic
Viljami uses the cutted (1,3 mm) AM06 in rear. It gives the same roll center as AM06S but ~1,7 mm narrower track width.
Last edited by Oleg Babich; 01-11-2014 at 05:07 AM.
#5215
R/C Tech Elite Member
iTrader: (28)
C21 is an option --- first batch sold out but more on the way..
Nothing else changes with the car really. Whatever you liked to run on the A700L should map over to the Evo.
One important note. The Evo "bulkhead" is 1.3mm lower than the am01-1 from the A700L. Make sure to adjust shimming accordingly.
#5216
I dont think anyone knows what Evo first aid parts are yet. I'm thinking upper camber link plates will be important. A complete FFG will be usef for spares initally ... So if/when folks have issues they should just reach out.
C21 is an option --- first batch sold out but more on the way...
C21 is an option --- first batch sold out but more on the way...
On which track condition is C21 useful?
Thanks;
G-rem
#5217
Hi G-rem,
These are the Part Nr:
A700-AM42 FFG Link Holder Front
A700-AM54 FFG Link Holder Rear
No Parts of the FFG kit are weak. But when you are lonely on a Track as a A700-Evo driver and a part of your FFG break then you will have spare !
This is the reason why a spare FFg is usefull.
The C21 Carbon Topdeck is good on High Grip conditions ! It make the car less nervouse and more direct to drive in my opinion.
Best Regards Max
These are the Part Nr:
A700-AM42 FFG Link Holder Front
A700-AM54 FFG Link Holder Rear
No Parts of the FFG kit are weak. But when you are lonely on a Track as a A700-Evo driver and a part of your FFG break then you will have spare !
This is the reason why a spare FFg is usefull.
The C21 Carbon Topdeck is good on High Grip conditions ! It make the car less nervouse and more direct to drive in my opinion.
Best Regards Max
#5218
Thanks a lot for your answers Max!
Cheers,
G-rem
Cheers,
G-rem
#5219
Tech Lord
iTrader: (32)
Wow! Viljami's car was REALLY good! He flew off the track trying to get around Ronald and managed to catch back up with him in only a few laps. You can really see how much he's able to out turn Ronald, especially later in the race when Ronald's car started to push.
+ YouTube Video | |