Talkin' with Josh Cyrul
#1126
Tech Champion
iTrader: (5)
Short arm Xray
Josh-have you found that the Xray with short arms on carpet/foam tires likes shorter or longer camber links?
My cars quite well balanced-carrying pretty good corner speed-and although it looks like it corners VERY flat, it must be run quite high off the carpet to keep the chassis sides from rubbing from the front almost all the way to the back. By high I mean 4.5 to 5mm. I am wondering if theres a camber link location that limits the roll, but still provides the stability and side bite.
Thanks,
Ray
My cars quite well balanced-carrying pretty good corner speed-and although it looks like it corners VERY flat, it must be run quite high off the carpet to keep the chassis sides from rubbing from the front almost all the way to the back. By high I mean 4.5 to 5mm. I am wondering if theres a camber link location that limits the roll, but still provides the stability and side bite.
Thanks,
Ray
#1127
Josh ,
where can I get a kyosho evolva hat and shirt from? thanks in advance.I am starting to get pumped it is getting closer to racing time. And if you get a chance can you post your set up from florida and some of the things you done and what you thought. thanks in advance.
mike wannett
where can I get a kyosho evolva hat and shirt from? thanks in advance.I am starting to get pumped it is getting closer to racing time. And if you get a chance can you post your set up from florida and some of the things you done and what you thought. thanks in advance.
mike wannett
#1128
Tech Adept
Josh,
I'm having a problem with my centax clutch on my Reflex. I can't seem to get it set right so I can clear the roof and land in the frozen pool. Any suggestions? More loctite? Okay! Braaaaaa!!!
I'm having a problem with my centax clutch on my Reflex. I can't seem to get it set right so I can clear the roof and land in the frozen pool. Any suggestions? More loctite? Okay! Braaaaaa!!!
#1129
Tech Adept
Remember Me
#1130
Tech Adept
Josh,,
What up its Baby Drew just had a few ? for u about the car is your email the same as before if not here is mine [email protected] thanks...
What up its Baby Drew just had a few ? for u about the car is your email the same as before if not here is mine [email protected] thanks...
#1132
Tech Fanatic
iTrader: (1)
Join Date: May 2003
Location: Was in Toledo, OH now Battle Ground, WA
Posts: 833
Trader Rating: 1 (100%+)
Kropy, do we really want to know where you have hidden it this time? Hint, hint, PICKLES?
Josh, sorry I had to go there, it was way tooooo easy. lol
Josh, sorry I had to go there, it was way tooooo easy. lol
#1133
Tech Master
iTrader: (1)
Blake - Short arms all the way!!
Ray - I'm running my camber links in shorter positions than when I ran the long a-arms. Remember, there's never a "perfect" position. Everything is a balance....
whynot - I have no clue where to get hats or shirts from..lol.. Check Great Planes I guess.... I have to work on the pdf file for the web site... Hopefully I'll have it on our site soon...
Aaron - Hmm, try more nitro!!! ok, BYE!
scarecrow - Will do!!
Baby Drew - Same e-mail!!
Kropy and Scott - You guys aren't right!!
Ray - I'm running my camber links in shorter positions than when I ran the long a-arms. Remember, there's never a "perfect" position. Everything is a balance....
whynot - I have no clue where to get hats or shirts from..lol.. Check Great Planes I guess.... I have to work on the pdf file for the web site... Hopefully I'll have it on our site soon...
Aaron - Hmm, try more nitro!!! ok, BYE!
scarecrow - Will do!!
Baby Drew - Same e-mail!!
Kropy and Scott - You guys aren't right!!
#1135
Tech Champion
iTrader: (6)
Originally posted by Josh Cyrul
trackdesigner71 - I received the e-mail... Sorry about that... I get a little confused going through all the r/c tech and e-mails....
spotinc - lol... No, I'm not afraid to race down there or against any driver in the world. I just have a lot going on and I had to prepare for something else a bit more important than a race (at this point in time).... I'll be at the World's...
Windsonguy and NitroHead - Thanks!!...lol...
trackdesigner71 - I received the e-mail... Sorry about that... I get a little confused going through all the r/c tech and e-mails....
spotinc - lol... No, I'm not afraid to race down there or against any driver in the world. I just have a lot going on and I had to prepare for something else a bit more important than a race (at this point in time).... I'll be at the World's...
Windsonguy and NitroHead - Thanks!!...lol...
#1136
R/C Tech Founder
trackdesigner: It is pretty difficult for people to make commitments to far off races, especially when it's over a year. I couldn't tell you where I'm going to be next March, let alone whether I'll have time to race.
If you're planning a big event, focus on making it as good as it can possibly be; you want the event to stand out by itself, and not just because of who is attending.
At least, that's my take on it. Don't mean to offend.
If you're planning a big event, focus on making it as good as it can possibly be; you want the event to stand out by itself, and not just because of who is attending.
At least, that's my take on it. Don't mean to offend.
#1137
Tech Champion
iTrader: (6)
Originally posted by futureal
trackdesigner: It is pretty difficult for people to make commitments to far off races, especially when it's over a year. I couldn't tell you where I'm going to be next March, let alone whether I'll have time to race.
If you're planning a big event, focus on making it as good as it can possibly be; you want the event to stand out by itself, and not just because of who is attending.
At least, that's my take on it. Don't mean to offend.
trackdesigner: It is pretty difficult for people to make commitments to far off races, especially when it's over a year. I couldn't tell you where I'm going to be next March, let alone whether I'll have time to race.
If you're planning a big event, focus on making it as good as it can possibly be; you want the event to stand out by itself, and not just because of who is attending.
At least, that's my take on it. Don't mean to offend.
#1138
Project
Hi Josh. What about the project? Has it die?
Edward
BTW, I know the tuner name ( remember Ft Mayers our conversation).
Edward
BTW, I know the tuner name ( remember Ft Mayers our conversation).
#1139
Tech Fanatic
iTrader: (1)
Join Date: May 2003
Location: Was in Toledo, OH now Battle Ground, WA
Posts: 833
Trader Rating: 1 (100%+)
If you come down Josh are you bringing halo again. Now that was entainment!