1/10 R/C F1's...Pics, Discussions, Whatever...
#7726
Tech Master
iTrader: (41)
TCs are double deck chassis and they flex.
I guess a better description of what I was thinking is this...every double deck car, TC, F201, FGX, ect...has to be put up on chassis blocks and have the upper deck screws loosened to untweak the chassis. As the cars go through their paces on the track they twist and get stuck on the bulkheads and stand-offs that connect the upper and lower deck. Now with the FGX when the chassis twists, having the front suspension on the upper deck is going to do 2 things...first the tweak will be exaggerated because of the stand-offs, and 2nd the front and rear suspension will no longer be aligned.
I guess a better description of what I was thinking is this...every double deck car, TC, F201, FGX, ect...has to be put up on chassis blocks and have the upper deck screws loosened to untweak the chassis. As the cars go through their paces on the track they twist and get stuck on the bulkheads and stand-offs that connect the upper and lower deck. Now with the FGX when the chassis twists, having the front suspension on the upper deck is going to do 2 things...first the tweak will be exaggerated because of the stand-offs, and 2nd the front and rear suspension will no longer be aligned.
But anything can happen in the main.
#7727
#7729
#7730
Tech Champion
Every double deck chassis gets tweaked. It happens over time but they all get to a point where you need to put them back up on blocks and release the tension in the upper deck screws so the chassis sits flat again. Maybe if they mounted the upper deck to the bulkheads with some sort of pivot it wouldn't happen but that would just add too much un-needed weight.
#7731
Tech Champion
I ordered one of these from Brad earlier today too Best value for the money in the F1 class for sure! That front suspension knuckle looks like the one on my CRC Xti
#7732
Tech Champion
#7735
Its the Tamiya F2012 kit, I just did some cosmetic grinding in the front this kit is 30g heavier than the F60 kit front wing is 8g heavier and the rear wing is 3g lighter.
I am pretty sure its not going to work, the body mount in the nose piece is countersunk. I will post a pic in a bit.
I am pretty sure its not going to work, the body mount in the nose piece is countersunk. I will post a pic in a bit.