Tekin RS ESC sensored
Tech Champion
iTrader: (107)
I love the new 208 software...
I have no problems with it. I followed the instructions from Tekin and installed it on my laptop and my hobby shop computer and works great.
I have no problems with it. I followed the instructions from Tekin and installed it on my laptop and my hobby shop computer and works great.
Tech Elite
iTrader: (49)
Tekin RS problem: Steering works, throttle dead
So, on Saturday I was at WCRC, and after hitting the double/tabletop jump, my B4 landed and just stopped moving. I pulled it off and noticed that the steering worked, but the throttle was dead.
I tried different sensor wires, 2 different motors, still nothing.
The LEDs on the RS all light up in sucession when I pull the trigger, and also light up when I brake, just as they normally would do...the only thing is that the motor doesn't move. I tried a brand-new motor, and the same thing...speedo lights up, but no movement.
I switched the channels of my receiver just to make sure it wasn't that, and the channels work fine (pulling the trigger steered the servo, turning the wheel lit up the LEDs on the speedo).
Anyone have something like this happen before?
I tried different sensor wires, 2 different motors, still nothing.
The LEDs on the RS all light up in sucession when I pull the trigger, and also light up when I brake, just as they normally would do...the only thing is that the motor doesn't move. I tried a brand-new motor, and the same thing...speedo lights up, but no movement.
I switched the channels of my receiver just to make sure it wasn't that, and the channels work fine (pulling the trigger steered the servo, turning the wheel lit up the LEDs on the speedo).
Anyone have something like this happen before?
Tech Elite
iTrader: (267)
Me to love it!!! Tekin 208 for the win!!! Heard you killed it last night in 17.5 truck way to go kevin!!! See you soon!!!
So, on Saturday I was at WCRC, and after hitting the double/tabletop jump, my B4 landed and just stopped moving. I pulled it off and noticed that the steering worked, but the throttle was dead.
I tried different sensor wires, 2 different motors, still nothing.
The LEDs on the RS all light up in sucession when I pull the trigger, and also light up when I brake, just as they normally would do...the only thing is that the motor doesn't move. I tried a brand-new motor, and the same thing...speedo lights up, but no movement.
I switched the channels of my receiver just to make sure it wasn't that, and the channels work fine (pulling the trigger steered the servo, turning the wheel lit up the LEDs on the speedo).
Anyone have something like this happen before?
I tried different sensor wires, 2 different motors, still nothing.
The LEDs on the RS all light up in sucession when I pull the trigger, and also light up when I brake, just as they normally would do...the only thing is that the motor doesn't move. I tried a brand-new motor, and the same thing...speedo lights up, but no movement.
I switched the channels of my receiver just to make sure it wasn't that, and the channels work fine (pulling the trigger steered the servo, turning the wheel lit up the LEDs on the speedo).
Anyone have something like this happen before?
Tech Lord
iTrader: (103)
So, on Saturday I was at WCRC, and after hitting the double/tabletop jump, my B4 landed and just stopped moving. I pulled it off and noticed that the steering worked, but the throttle was dead.
I tried different sensor wires, 2 different motors, still nothing.
The LEDs on the RS all light up in sucession when I pull the trigger, and also light up when I brake, just as they normally would do...the only thing is that the motor doesn't move. I tried a brand-new motor, and the same thing...speedo lights up, but no movement.
I switched the channels of my receiver just to make sure it wasn't that, and the channels work fine (pulling the trigger steered the servo, turning the wheel lit up the LEDs on the speedo).
Anyone have something like this happen before?
I tried different sensor wires, 2 different motors, still nothing.
The LEDs on the RS all light up in sucession when I pull the trigger, and also light up when I brake, just as they normally would do...the only thing is that the motor doesn't move. I tried a brand-new motor, and the same thing...speedo lights up, but no movement.
I switched the channels of my receiver just to make sure it wasn't that, and the channels work fine (pulling the trigger steered the servo, turning the wheel lit up the LEDs on the speedo).
Anyone have something like this happen before?
Tech Elite
iTrader: (49)
I don't have the Hot Wire. I guess I'll go pick that up tonight from my LHS. I'll give that a shot. Thanks!
Tech Elite
iTrader: (49)
I only run 2 cell. It does not beep when I turn it on. Thanks though!
Tech Lord
iTrader: (103)
i know,this is a problem that some have when going from 2-1 it does the same thing,ramp and no movement,check to make sure it did not change the voltage,it is a long shot but with some funny things happening anything is possible.try a reset and recalibrate
Hello There,
Does anyone have a LRP X12 8.5 Brushless 1/12th setup in the sensord mode? And what Spur and pinion should I use?
Here's the track size and my car info:
100"X45" Feet
1.72" inch rear tire
Does anyone have a LRP X12 8.5 Brushless 1/12th setup in the sensord mode? And what Spur and pinion should I use?
Here's the track size and my car info:
100"X45" Feet
1.72" inch rear tire
Tech Adept
with 203 i run my brakes at 65-75% on the radio, with 208 even on 100% they are strong but delayed when braking from high speed (ie. turbo mode on) the motor is turning in the 50k+ rpm mark.
I can see the full brake lights flashing so there's no issue with not getting full signal.
What motor is this?
Tech Elite
iTrader: (50)
looking for a starting poing on a 17.5 tekin rs setup on 1s lipo in a 5.1. We are allowd to run boost and my track is 70x35 feet.
Tech Lord
iTrader: (103)
just making sure i have this right before i melt somethin down! if you are running in sensored mode it does not matter where the endbell timing is right?
Tech Lord
iTrader: (103)