Tekin RS ESC sensored
#6046
Hey bud, I run Vista 64 on my laptop and I have the new Tekin software on there. I uninstalled the old version and installed the new version. Works like a champ!
Randy, I am having a slight issue with my motor. I run a Tekin Redline 17.5 in my mini car, with a gear ratio of 2.7:1. On version 199, I was maintaining temperatures of 116 - 120. Under this new version, I am now getting weird temperature readings. I did 3 sessions last night. The settings are in that setting thread that someone else posted on. The first session, I got my temperature reading at 120. Second run, 158!!! Third run, 116. It is weird. I have not changed any settings between those runs. It is the same configuration as in the settings thread. Have you experienced this? Do you know of anyone else that has experienced this? These temperatures are from my motor.
RANDY FOR PRESIDENT!!
Randy, I am having a slight issue with my motor. I run a Tekin Redline 17.5 in my mini car, with a gear ratio of 2.7:1. On version 199, I was maintaining temperatures of 116 - 120. Under this new version, I am now getting weird temperature readings. I did 3 sessions last night. The settings are in that setting thread that someone else posted on. The first session, I got my temperature reading at 120. Second run, 158!!! Third run, 116. It is weird. I have not changed any settings between those runs. It is the same configuration as in the settings thread. Have you experienced this? Do you know of anyone else that has experienced this? These temperatures are from my motor.
RANDY FOR PRESIDENT!!
I heard somewhere the readings are also better taken on a flat surface, (as opposed to the ripples we have on the can) this might have something to do with it, maybe?
#6047
.
Last edited by mikecatts; 09-16-2010 at 05:26 AM.
#6048
Tech Elite
iTrader: (98)
Hi all....after waiting very patiently for the "v200"........et as per instructions...Im no dummy...And guess what guys...no bakes.....what a joke.......the SPX is heaps better in the brakes...and so is the KO.even the "cheap" 30amp esc out brakes these joke items...so what gives?
I have3 RS Pro's...going cheap..1 still in new-unopened packet..
Pm me..
as you can see..I have given up...
Mike
I have3 RS Pro's...going cheap..1 still in new-unopened packet..
Pm me..
as you can see..I have given up...
Mike
#6049
.
Last edited by mikecatts; 09-16-2010 at 05:26 AM.
#6050
Tech Elite
iTrader: (98)
Hi all....after waiting very patiently for the "v200"........set as per instructions...Im no dummy...And guess what guys...no brakes.....what a joke.......the SPX is heaps better in the brakes...and so is the KO.even the "cheap" 30amp esc out brakes these joke items...so what gives?
I have3 RS Pro's...going cheap..1 still in new-unopened packet..
Pm me..
as you can see..I have given up...
Mike ...
sticky key board..so redone..
I have3 RS Pro's...going cheap..1 still in new-unopened packet..
Pm me..
as you can see..I have given up...
Mike ...
sticky key board..so redone..
#6051
.
Last edited by mikecatts; 09-16-2010 at 05:26 AM.
#6052
Tech Elite
iTrader: (3)
Same here, guys. My email address: [email protected] Thanks, in advance.
#6053
Tech Champion
iTrader: (32)
Guys, I am moving from an SPX to the RS and I am planning to go with the following settings;
Drag - 20
Reverse - 100
Brake - 100
Neutral - 5
Motor - BL-FW
Throttle - 5
Volt Cut - 2
Push - Off
Timing - 0 (and default timing on my LRP motor)
Current - Off
Sensored - Yes
Boost - 20
Turbo - Max delay - 0.5
With my SPX set on profile 8 (max punch) I am running 5.3 FDR - should I keep this the same with the settings above as I have the Throttle Profile at 5 and the Boost and Turbo on?
Drag - 20
Reverse - 100
Brake - 100
Neutral - 5
Motor - BL-FW
Throttle - 5
Volt Cut - 2
Push - Off
Timing - 0 (and default timing on my LRP motor)
Current - Off
Sensored - Yes
Boost - 20
Turbo - Max delay - 0.5
With my SPX set on profile 8 (max punch) I am running 5.3 FDR - should I keep this the same with the settings above as I have the Throttle Profile at 5 and the Boost and Turbo on?
#6054
Tech Elite
iTrader: (2)
Just trying to be logical about it, but were the temperature readings taken roughly at the same time after the race had finished and at the same place on the can?
I heard somewhere the readings are also better taken on a flat surface, (as opposed to the ripples we have on the can) this might have something to do with it, maybe?
I heard somewhere the readings are also better taken on a flat surface, (as opposed to the ripples we have on the can) this might have something to do with it, maybe?
Think my motor is toast?
#6055
Hi all....after waiting very patiently for the "v200"........set as per instructions...Im no dummy...And guess what guys...no brakes.....what a joke.......the SPX is heaps better in the brakes...and so is the KO.even the "cheap" 30amp esc out brakes these joke items...so what gives?
I have3 RS Pro's...going cheap..1 still in new-unopened packet..
Pm me..
as you can see..I have given up...
Mike ...
sticky key board..so redone..
I have3 RS Pro's...going cheap..1 still in new-unopened packet..
Pm me..
as you can see..I have given up...
Mike ...
sticky key board..so redone..
#6056
Tech Master
Hi all....after waiting very patiently for the "v200"........set as per instructions...Im no dummy...And guess what guys...no brakes.....what a joke.......the SPX is heaps better in the brakes...and so is the KO.even the "cheap" 30amp esc out brakes these joke items...so what gives?
I have3 RS Pro's...going cheap..1 still in new-unopened packet..
Pm me..
as you can see..I have given up...
Mike ...
sticky key board..so redone..
I have3 RS Pro's...going cheap..1 still in new-unopened packet..
Pm me..
as you can see..I have given up...
Mike ...
sticky key board..so redone..
It's probably your settings in your radio.
Set every thing on max on your radio.
#6057
Tech Addict
iTrader: (1)
Hi all....after waiting very patiently for the "v200"........et as per instructions...Im no dummy...And guess what guys...no bakes.....what a joke.......the SPX is heaps better in the brakes...and so is the KO.even the "cheap" 30amp esc out brakes these joke items...so what gives?
I have3 RS Pro's...going cheap..1 still in new-unopened packet..
Pm me..
as you can see..I have given up...
Mike
I have3 RS Pro's...going cheap..1 still in new-unopened packet..
Pm me..
as you can see..I have given up...
Mike
I understand your frustration, but when you re calibrated your transmitter to the speedy did you use a fresh model with default settings.
I had the same problem with my Nomadio React until i used a fresh Model with the default setting and have Fantastic high speed braking so dont blame the Tekin speedy.
Steven
#6058
I agree with Clint, that's a bit tall for 13.5 I believe. The setup is sound though.
What are the track demensions? Got a pic of the layout?
On your motor what is coming off? The plastic cap?
Mike, are you getting all led's flashing on your RS once you've calibrated it? What transmitter?
What are the track demensions? Got a pic of the layout?
On your motor what is coming off? The plastic cap?
Mike, are you getting all led's flashing on your RS once you've calibrated it? What transmitter?
#6059
Tech Elite
iTrader: (2)
It's the entire rear end with the plastic cap. I almost crapped my pants when I saw it. I do not know how it happened. We don't have any barriers setup on our track yet and all I was doing was going up and down, testing the turbo out. It wasn't until the 4th time down, I heard a wierd sound, sort of the same sound you hear when a pebble gets caught in between the spur and pinion. I pick up the car, look around, and notice the back part of the motor was dislodged!!! It wasn't fully off, but it was dislodged. I pushed it back in and the motor sounded fine. After a few more runs, the sound came back and it was the same issue!!
Is the motor gone? I sure hope not, we have our first major race coming at the end of August. I love this motor to death!!
Is the motor gone? I sure hope not, we have our first major race coming at the end of August. I love this motor to death!!
#6060
Tech Regular
Hi all....after waiting very patiently for the "v200"........set as per instructions...Im no dummy...And guess what guys...no brakes.....what a joke.......the SPX is heaps better in the brakes...and so is the KO.even the "cheap" 30amp esc out brakes these joke items...so what gives?
I have3 RS Pro's...going cheap..1 still in new-unopened packet..
Pm me..
as you can see..I have given up...
Mike ...
sticky key board..so redone..
I have3 RS Pro's...going cheap..1 still in new-unopened packet..
Pm me..
as you can see..I have given up...
Mike ...
sticky key board..so redone..