R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 12-31-2009, 01:50 PM   #9286
Tech Fanatic
 
bukil's Avatar
 
Join Date: Feb 2006
Location: BenTooWrah
Posts: 998
Trader Rating: 39 (100%+)
Default

Wow.... This new firmware will set new rc racing boundaries. Wow just wow.

I'm heading to the track this afternoon to do some testing. Will post what I come up with.
bukil is offline   Reply With Quote
Old 12-31-2009, 01:51 PM   #9287
Tech Master
 
Ron Goetter's Avatar
 
Join Date: Nov 2006
Location: Goatsville, PA
Posts: 1,950
Trader Rating: 17 (95%+)
Send a message via AIM to Ron Goetter
Default

Quote:
Originally Posted by LOW ET View Post
so for the guys who's tested this already. give up an esc profile/gear ratio that will work on a rubber touring lrp x12 13.5 on a 90' x 40' track.

The X-12 is going to require alot less timing then a duo. I'd start with your normal gearing for your X-12 and run about 20 boost and 10 turbo with a 3 delay. Maybe have the rpm range set up from 1000 rpm's to 6000 rpm's. Be sure to check your temps often.

I haven't played with my X-12 yet. Maybe this weekend if I get a chance.
__________________
The Goat... B-Mainer Fo' life
-Awesomatix USA-ROCHE USA-Team CRC-ORCA-SIDE PIECE RACING-TEAM DAK-EA Motorsports-VP Fuel-Trains and Lanes-CR Graphics-TQ Wire-Horsham RC-rugburn anyone?
Shut up and Race!!!!
Ron Goetter is offline   Reply With Quote
Old 12-31-2009, 01:52 PM   #9288
Tech Master
 
Danny-b23's Avatar
 
Join Date: Feb 2009
Location: Saskatoon, SK, Canada
Posts: 1,335
Trader Rating: 3 (100%+)
Default

I'll post my findings for a small 50x30 carpet track tomorrow night after practice.
__________________
RC America|XRAY|ORCA|Motiv|EA Motorsports
Danny Buck
WCICS Rep - Round 1, Saskatoon, SK
Danny-b23 is offline   Reply With Quote
Old 12-31-2009, 01:52 PM   #9289
Tech Master
 
RC-ProSpeed's Avatar
 
Join Date: Nov 2006
Location: Northern VA
Posts: 1,066
Trader Rating: 8 (100%+)
Default

Quote:
Originally Posted by 20 SMOKE View Post
go to the home page and it there follow the link it says vegas 2
Thanks...
__________________
RCRNV (www.rcrnv.com) / *Keep On-Road alive!*
- Nitro Touring - Kyosho EVO 2 WC
- Electric - TC6 (Out of the Box! No upgrades needed)
- F1 - F103RM (Out of the Box! No upgrades needed)
RC-ProSpeed is offline   Reply With Quote
Old 12-31-2009, 01:53 PM   #9290
Tech Elite
 
LOW ET's Avatar
 
Join Date: Dec 2007
Location: cleveland, ohio
Posts: 2,881
Trader Rating: 97 (100%+)
Default

thanks, post up your findings or send me a pm.
LOW ET is offline   Reply With Quote
Old 12-31-2009, 01:55 PM   #9291
Tech Champion
 
RedBullFiXX's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Intergalactic Planetary
Posts: 6,542
Trader Rating: 34 (100%+)
Default

Anyone tried this on a Redline 13.5 12th scale yet.
What might be a good starting point for a high speed layout ?
RedBullFiXX is offline   Reply With Quote
Old 12-31-2009, 01:58 PM   #9292
Tech Elite
 
303slowdown's Avatar
 
Join Date: Sep 2008
Location: Rapid City SD.
Posts: 2,299
Trader Rating: 24 (100%+)
Default

i dont recomend trying the 13.5 rubber tc settings from a few pages back on a 13.5 1s 1/12 scale on an oval it gets hot fast. just for your info.
303slowdown is offline   Reply With Quote
Old 12-31-2009, 02:03 PM   #9293
Tech Fanatic
 
DriftDreamer06's Avatar
 
Join Date: Apr 2006
Posts: 826
Trader Rating: 12 (100%+)
Default

Thank you to Tekin
DriftDreamer06 is offline   Reply With Quote
Old 12-31-2009, 02:06 PM   #9294
Tech Adept
 
Join Date: Aug 2005
Location: Perth
Posts: 103
Trader Rating: 2 (100%+)
Default

Hi Guys 3rd times a charm hopefully I asked this question a few pages back and was hoping to get some feedback from Randy or someone else on here anyone?

What settings for my esc and motor+ FDR would you recommend for this application. Running in 13.5 superstock class 310 metre long track using rubber tyres, and with the fastest time in this class at the moment being a 21sec lap but with the new software I dont see that lasting long.
The straight is 60metres long btw.



Thanks in advance Cheers Dave
Toolmannz2 is offline   Reply With Quote
Old 12-31-2009, 02:08 PM   #9295
Tech Adept
 
Join Date: Aug 2005
Location: Perth
Posts: 103
Trader Rating: 2 (100%+)
Default

Sorry forgot to add Im running a RS and and a Tekin Redline 13.5
Toolmannz2 is offline   Reply With Quote
Old 12-31-2009, 02:09 PM   #9296
Tech Adept
 
Join Date: Oct 2008
Location: Great Falls, MT
Posts: 190
Default

Quote:
Originally Posted by Danny-b23 View Post
I'll post my findings for a small 50x30 carpet track tomorrow night after practice.
Danny,

Thanks, that would be great. I will be able to test on Saturday and that would give some of us small track guys a good starting point.

Are you running 1/12th?

I'm running 1/12 BMI with Redline 17.5. Our track is 24x50 with a sweeper entering the straight. My best combination of low-end performance, speed and lap time with the V2.00 are listed below.

Roll-Out 81.2mm with gear at 47/80 - tire 44mm
Motor Timing 0*
Boost 23*
Turbo 10*
Delay 0.3 sec

Thanks,

Aaron
__________________
Dude, Go RRReally FFFast - When something gets in your way - Turrrnn
VRacing is offline   Reply With Quote
Old 12-31-2009, 02:28 PM   #9297
Tech Elite
 
Join Date: Jan 2003
Location: lost...
Posts: 2,854
Trader Rating: 2 (100%+)
Default

Do you need the rpm calculations or is it optional when using V203?
RoyU is offline   Reply With Quote
Old 12-31-2009, 02:30 PM   #9298
Tech Elite
 
Join Date: Jan 2003
Location: lost...
Posts: 2,854
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by AOD View Post
I thought you guys could use a laugh. My wife leaves for Wisconsin in 3 hours for three weeks and all I can think of right now is playing with my new firmware when I get home from work.
You're working today? Looks like I need to get a netbook for the track.
RoyU is offline   Reply With Quote
Old 12-31-2009, 02:32 PM   #9299
Tech Lord
 
20 SMOKE's Avatar
 
Join Date: Dec 2003
Location: HVR_ WEEKI WACHEE FL
Posts: 10,299
Trader Rating: 101 (100%+)
Default

other than a little faster ramp is there anything else
__________________
Jamie W
*Team Tekin*Tekno-rc*DE Racing*AKA*DDHRC*
20 SMOKE is offline   Reply With Quote
Old 12-31-2009, 02:55 PM   #9300
Tech Fanatic
 
Join Date: Jun 2005
Posts: 900
Default

Can someone (Randy?) give me a short explanation of what I should be doing with this new software? Feel like a bit of a fool, as everyone else seems to know, but I don't!

I'm running a Redline 10.5 on 1S LiPo in 12th. Currently set on zero motor timing, a high-ish ratio, 20 boost and 10 turbo on 0.7 sec. What settings do I need to sort out with this version, and how should I use the rpm range?

All help welcome! Thanks in advance.

PS - can we sort out a name for it?!!! Since it is Vegas2 on the link, and 4.0 on the file, could we use Vegas 2 as a suitable moniker? Vegas2, that sounds good...
SlowerOne is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tekin Redline RS Sensored ESC and motors, opinions for offroad? Cain Electric Off-Road 4230 06-07-2015 04:38 PM
Sensored vs. Sensorless lemansracer Electric On-Road 71 02-14-2009 03:19 AM
New Tekin Redline Sensored Motors are Roar Legal! Randy_Pike Electric On-Road 3 08-05-2008 02:08 AM
Tekin Redline Sensored 10.5 HUCKMAN Electric On-Road 6 07-15-2008 08:50 PM
sensored vs sensorless bprocket Rookie Zone 5 05-16-2008 09:38 AM


Tags
v203, vegas 2.0


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 10:52 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net