New TEAM WAVE racing brushless system
#1578
.
Last edited by littlealex; 09-21-2010 at 09:41 AM.
#1582
I set my thottle end point to 95%, set the speedo and change the end point back to 100%. No problems with Esprit 3 stick radio
#1583
anyway i contacted teamwave directly and they didnt ask much questions, they just told me to send the esc back to them
#1585
Tech Adept
iTrader: (1)
Well glad you got it sorted to a degree hehehe... they are pretty quick at turning around any problems
actually i have contact dinball but their response is slow and they ask me 1 question a day such as asking me for picture, then next day they will ask me what gear ratio and car i were using, take a video...at last email they said they will contact teamwave and never heard from them again and i dont think i will hear from them again.
anyway i contacted teamwave directly and they didnt ask much questions, they just told me to send the esc back to them
anyway i contacted teamwave directly and they didnt ask much questions, they just told me to send the esc back to them
#1586
Tech Adept
Does someone know if Team Wave is still allive? i did not get any reply on my e-mail/pm's
Team Wave if u read this please contact me.
Team Wave if u read this please contact me.
#1588
RB-S blown?
Hy there!
Looks like my RB-S is going back for service.
I run it since Feb. this year, with no Ptolems at all. The most of the time with an X11 9,5 with 5cells , and also 13,5T with Lipos.
Today i runned the firs battery, and after a 2 corners, the car gone to half speed. The LEDīs on the speedo are normal. Switch of and on, it goes normal, and after a few corners the same thin happens again. Half Power.
Wehn you carry on, it goes again 2-3 corners on half power, and then it stops or crawl. Then the red LED comes on solid -> Temp cut off, but there is nothing hot... ?!?
If you switch it off and on the same game again...
Tried a other sensorwire, and dismantled the motor completly, and also flashed the speedo firmware 202 again. Always the same.
Have anyone had the same issues like me now?
Greetings from Austria,
Rainer
Looks like my RB-S is going back for service.
I run it since Feb. this year, with no Ptolems at all. The most of the time with an X11 9,5 with 5cells , and also 13,5T with Lipos.
Today i runned the firs battery, and after a 2 corners, the car gone to half speed. The LEDīs on the speedo are normal. Switch of and on, it goes normal, and after a few corners the same thin happens again. Half Power.
Wehn you carry on, it goes again 2-3 corners on half power, and then it stops or crawl. Then the red LED comes on solid -> Temp cut off, but there is nothing hot... ?!?
If you switch it off and on the same game again...
Tried a other sensorwire, and dismantled the motor completly, and also flashed the speedo firmware 202 again. Always the same.
Have anyone had the same issues like me now?
Greetings from Austria,
Rainer
#1590
Hy there!
Looks like my RB-S is going back for service.
I run it since Feb. this year, with no Ptolems at all. The most of the time with an X11 9,5 with 5cells , and also 13,5T with Lipos.
Today i runned the firs battery, and after a 2 corners, the car gone to half speed. The LEDīs on the speedo are normal. Switch of and on, it goes normal, and after a few corners the same thin happens again. Half Power.
Wehn you carry on, it goes again 2-3 corners on half power, and then it stops or crawl. Then the red LED comes on solid -> Temp cut off, but there is nothing hot... ?!?
If you switch it off and on the same game again...
Tried a other sensorwire, and dismantled the motor completly, and also flashed the speedo firmware 202 again. Always the same.
Have anyone had the same issues like me now?
Greetings from Austria,
Rainer
Looks like my RB-S is going back for service.
I run it since Feb. this year, with no Ptolems at all. The most of the time with an X11 9,5 with 5cells , and also 13,5T with Lipos.
Today i runned the firs battery, and after a 2 corners, the car gone to half speed. The LEDīs on the speedo are normal. Switch of and on, it goes normal, and after a few corners the same thin happens again. Half Power.
Wehn you carry on, it goes again 2-3 corners on half power, and then it stops or crawl. Then the red LED comes on solid -> Temp cut off, but there is nothing hot... ?!?
If you switch it off and on the same game again...
Tried a other sensorwire, and dismantled the motor completly, and also flashed the speedo firmware 202 again. Always the same.
Have anyone had the same issues like me now?
Greetings from Austria,
Rainer