New TEAM WAVE racing brushless system
05-23-2009, 04:37 AM
#316
hi...just tested RB50-3.5R yesterday with 416 with MaxAmps 4200mAh 35c....with standard profile....seems less powerful than GTB-3.5r and Vortex-3.5r.
how much is the burst Amp from Rb50???
thanks
how much is the burst Amp from Rb50???
thanks
05-24-2009, 12:48 AM
#317
Jamesalex,
The programming box is sales separately at USD25 or comes with combo pack at USD20 more. It will be on our online shop soon.
t4m1y4niac,
less powerful? I think you haven't switch on Turbo and move up Timing.
The programming box is sales separately at USD25 or comes with combo pack at USD20 more. It will be on our online shop soon.
t4m1y4niac,
less powerful? I think you haven't switch on Turbo and move up Timing.
05-24-2009, 07:51 PM
#318
hi guys,
Just a quick question i have a rb30 speedy with a team wave 17.5 motor how should i be gearing it to take advantage of the turbo setting the current roll out is 55.48 on a medium size track, it was taking around 16 sec to do a lap.
I was running on the weekend and was getting eaten up 3/4 down the straight.
I also had the timing set at 4 is this correct or is there a better way i should be programing it for stock racing 1/10th tourer ashphelt rubber tc5
thanks for your help.
Just a quick question i have a rb30 speedy with a team wave 17.5 motor how should i be gearing it to take advantage of the turbo setting the current roll out is 55.48 on a medium size track, it was taking around 16 sec to do a lap.
I was running on the weekend and was getting eaten up 3/4 down the straight.
I also had the timing set at 4 is this correct or is there a better way i should be programing it for stock racing 1/10th tourer ashphelt rubber tc5
thanks for your help.
05-25-2009, 04:09 PM
#319
hi guys,
Just a quick question i have a rb30 speedy with a team wave 17.5 motor how should i be gearing it to take advantage of the turbo setting the current roll out is 55.48 on a medium size track, it was taking around 16 sec to do a lap.
I was running on the weekend and was getting eaten up 3/4 down the straight.
I also had the timing set at 4 is this correct or is there a better way i should be programing it for stock racing 1/10th tourer ashphelt rubber tc5
thanks for your help.
Just a quick question i have a rb30 speedy with a team wave 17.5 motor how should i be gearing it to take advantage of the turbo setting the current roll out is 55.48 on a medium size track, it was taking around 16 sec to do a lap.
I was running on the weekend and was getting eaten up 3/4 down the straight.
I also had the timing set at 4 is this correct or is there a better way i should be programing it for stock racing 1/10th tourer ashphelt rubber tc5
thanks for your help.
Can any any of the Team Wave guys help me out with this question.
Thanks
05-25-2009, 08:52 PM
#320
runinonempty,
You haven't go wrong with Turbo set to "1" and Timing set to "4". The speed on the straight is come from Turbo and the inner field, punch is come from Timing. You can try to set higher drive profile value which affect when the power comes. Gear ratio for 17.5T is 3.X - 4.X.
You haven't go wrong with Turbo set to "1" and Timing set to "4". The speed on the straight is come from Turbo and the inner field, punch is come from Timing. You can try to set higher drive profile value which affect when the power comes. Gear ratio for 17.5T is 3.X - 4.X.
05-25-2009, 11:03 PM
#322
Hi Max,
Just to confirm that, time shift affects the timing (I'm on 4), and turbo gives straightline (it's on
). The drive profile just affects the trottle curve, right?
Reason I ask is last weekend I went out by mistake in one final with the drive profile on 5... And if anything the car was easier to drive, with the motor coming off cooler to boot!
I've been running a 10.5 linear as well, and have actually now geared UP from where I was using the SP motor with my TC spec.
At west london I was on 4.96, and it was fast.
I know for one thing that the car was a rocket off the startline, in the afformention final I had a good one second lead after the first sweeper alone, just crazy!!
Only issue I'm having is with the very low speed brakes. It doesn't seem to affect the car whilst racing round, but if I just try and move the car slightly forward, it acts as if there are hardly any brakes on. Any ideas?
Overall though, very impressed, for the first time in a long time I'm not being out motored by anyone
Cheers
Ed
Just to confirm that, time shift affects the timing (I'm on 4), and turbo gives straightline (it's on
). The drive profile just affects the trottle curve, right?Reason I ask is last weekend I went out by mistake in one final with the drive profile on 5... And if anything the car was easier to drive, with the motor coming off cooler to boot!
I've been running a 10.5 linear as well, and have actually now geared UP from where I was using the SP motor with my TC spec.
At west london I was on 4.96, and it was fast.
I know for one thing that the car was a rocket off the startline, in the afformention final I had a good one second lead after the first sweeper alone, just crazy!!
Only issue I'm having is with the very low speed brakes. It doesn't seem to affect the car whilst racing round, but if I just try and move the car slightly forward, it acts as if there are hardly any brakes on. Any ideas?
Overall though, very impressed, for the first time in a long time I'm not being out motored by anyone
Cheers
Ed
05-26-2009, 07:52 AM
#323
I'm thinking about getting a RB30 or RB50 combo. This will be my first Brushless system. How does this system compare with the TEKIN RS and the RS PRO and the LRP systems. A lot of people in my area really like the TEKIN and its programing options.
05-26-2009, 09:47 AM
#324
Im pleased Max...
My 4wd buggy is done..kind of tight but its there...
05-26-2009, 10:51 AM
#325
cool
my RB50 is still blocked at customs
my RB50 is still blocked at customs
05-27-2009, 07:46 AM
#327
My TC5 with RB50 plugged into the handheld programmer.
05-27-2009, 09:28 AM
#328
RB50 is the way I want to go. I want see how this compares to the TEKIN RS PRO
05-27-2009, 11:06 AM
#329
Tech Rookie
What about the Linear 10.5T? Same as Speed Passion 10.5T?
Team wave shop is sending RB50 to Europe? How much in posting?
Thanks
Bye!
05-27-2009, 11:43 PM
#330
TEAM WAVE online shop will ship worldwide through registered air postal at USD7.99. If you would like to ship through EMS, please email us.