Hard case lipo pack under $35.00 bucks!?!?
#181
Tech Master
iTrader: (22)
Its hard to say why your mates pack requires less Mah to recharge. First make sure your drive train has nothing binding up, make sure your belts are loose, but not too loose that they slip on the pullys, you didnt say if your car is faster, but I'm assuming it is, it will use more of the battery up.
Thanks again
Terry
Last edited by Team Ash; 04-27-2008 at 03:22 AM. Reason: wrong weight
#183
Anybody knows what are the cells on these lipos?
#184
Tech Adept
iTrader: (1)
Dan, could you look at this and tell me if you feel this charger is sufficient for these batteries? I have a battery, and now I need to find a charger. This one seems to have the most bang for the buck - AC/DC (with adapter), built in balancer, up to 5A charging.
http://www.hobbycity.com/hobbycity/s...idProduct=6590
Also, when I received the battery, it says on the box to review the instructions before use, but there were no instructions with the battery. Is there a place online to download the instructions?
Thanks!
Greg
http://www.hobbycity.com/hobbycity/s...idProduct=6590
Also, when I received the battery, it says on the box to review the instructions before use, but there were no instructions with the battery. Is there a place online to download the instructions?
Thanks!
Greg
Last edited by Zagar; 04-28-2008 at 05:13 AM.
#185
Tech Regular
iTrader: (1)
Looks like a good charger to me
Dan, could you look at this and tell me if you feel this charger is sufficient for these batteries? I have a battery, and now I need to find a charger. This one seems to have the most bang for the buck - AC/DC (with adapter), built in balancer, up to 5A charging.
http://www.hobbycity.com/hobbycity/s...idProduct=6590
We also plan on having the instructions on the site soon.
Also, when I received the battery, it says on the box to review the instructions before use, but there were no instructions with the battery. Is there a place online to download the instructions?
Thanks!
Greg
http://www.hobbycity.com/hobbycity/s...idProduct=6590
We also plan on having the instructions on the site soon.
Also, when I received the battery, it says on the box to review the instructions before use, but there were no instructions with the battery. Is there a place online to download the instructions?
Thanks!
Greg
#188
Yesterday i ran it for the first time with a MM7700.My pack came with 12 AGW wire.Performance was impressive!I didn't expected too much punch .I have the impression that these packs are more than 3200mAh.I recharged it with my Robitronic Overloader at 1C.Charging stopped after 65 min and according my charger pack was full,has got 3200 mAh but when i checked the voltage was 4.10v/cell insted of something close to 4.2v/cell.I assume it could take some more mAh on charging so next time i'll try to charge it as a 3400 mAh pack.I'll run it again in a few hours and i'll post my comments again.
Later.
Later.
#189
Second time i ran it.Excellent as the first time.My car was flying.After a 5 min run with the Mamba max,on recharge it took back 3000mAh.I don't know for how long it will have the same performance as so far i wasn't so lucky with other lipos.
#191
I think i have to buy 2-3 packs more and leave the 120.00$ 4800 and 4900 a part.
#194
The balance taps are commonly known as Align taps. Same as the Core and the SMC packs.
#195
RDX
has anyone tryed these packs in a RDX ? NOT the phi, if so any mods ? pics ? also dose this place take paypal for payment ? and are they still 45 shipped ? of is there shipping now thanks jon