oldnwise

iTrader: (6)

Huggies Baby Wipes. Cleans up almost anything.

I)arkness

iTrader: (7)

personally experience with AW greas over the gears, i would just get some new gears. that is unless you dont mind scrubbing them with a toothbrush and degreaser

hairy

iTrader: (1)

Brake cleaner or "simple green"

tony gray

iTrader: (7)

Fluffy, you need to get that sucker down a LOT more. We're talking in the region of 5-6 mm, so half what you're currently running. It'll transform your car.
I'm not sure how you can do it if you're running the bog standard M05 friction shocks as there's no easy way to do it with them.
You're gonna need to change shocks I'm afraid (unless someone else knows any better way?)

gruman28

iTrader: (18)

Anyone using those black gears on there cooper? I ordered a set because I was curious.. Wondering if they will last longer?

Thanks
Chris

Fluffy622

iTrader: (1)

Hey Tony. I have the oil filled shocks on my M05. I was talkin about how there isnt any shock tower adjustment holes for lower or higher ride height. Any ideas? Thanks

tony gray

iTrader: (7)

You dont use shock tower adjustments to change ride height.

Read THIS (about halfway down) to show you how to change your shock length to drop the car down.

caltek1

iTrader: (38)

gruman28,

The Tamiya reinforced gear set works the same as the originals. Just black and should last longer. I have these fitted to my car and seems no different to me, they still have the same gear noise, even when using a little spray of silicon lube on them.

Later,

Calvin.

Fluffy622

iTrader: (1)

Wow very cool! I was wondering what those little spacers were for lol. That's a really cool and informative web site. Thanks for the help!

gruman28

iTrader: (18)

Thanks. I ordered a set of both. Does anyone know where I can order a set of spline outdrive cups? The ones that go through the diff (guess thats what they are called). I have a few different diffs I use and they all have the old splines on them. Mine are wore out.

Thanks
Chris

Tim K

Were you after standard (9805368) or hardened (53218) ?

Fluffy622

iTrader: (1)

Does anybody know the part number for the Tamiya M05 adjustable camber links? I cant find them on tower hobbies

caltek1

iTrader: (38)

Find attached a Link to Tamiya USA website for Hopups for the MO5. I believe google can be your best friend.

http://www.tamiyausa.com/product/rcp...=desc&offset=1

In response to your question PNo 54182. Check link above for accuracy.


Regards,

Calvin.

Granpa

Make your own-----much,much cheaper. All they are is a 3x12 mm set screw with 5mm adjuster ends.

Fluffy622

iTrader: (1)

Thanks Guys!