Tamiya Ta06
#1966
Tech Elite
iTrader: (18)
i own and race both a TA06 and 417... but i use them for specific type races... the TA06 is used for the spec TCS/TAC type races where only plastic tub chasis are allowed... the 417 is used to race the big open races (13.5/mod). personally if you want to run with the double deck CF boys, get a double deck CF kit. no point buying a tub chasis kit and upgrading it to compete with the pro-level cars.
#1967
Tech Adept
i own and race both a TA06 and 417... but i use them for specific type races... the TA06 is used for the spec TCS/TAC type races where only plastic tub chasis are allowed... the 417 is used to race the big open races (13.5/mod). personally if you want to run with the double deck CF boys, get a double deck CF kit. no point buying a tub chasis kit and upgrading it to compete with the pro-level cars.
Definitely great advice ,I love the 06 and in a B main it can be a contender but in
A main every driver can drive and equipment does matter
#1968
anyone know where I can buy tech racing stuff in north america as well as square racing aluminum parts in north america thanks
#1970
Tech Fanatic
iTrader: (10)
I have horrible traction roll. It's only On one hairpin after a chicane that I can speed through . I am running 17.5r 2* rear 2.5 front camber yokomo yellow damper oil.yellows front ,blues in the rear ,stiffest sway in the rear, med up front. I was running ifs until I realized the class has no weight min and tc bodies are allowed with touring wings. I'm going to run upright to save 123 grams and hep with the inconsistency.
Any hints? If I raise the spring rate, it negatively affects my straight line . My speed cannot be rivaled.
Any hints? If I raise the spring rate, it negatively affects my straight line . My speed cannot be rivaled.
#1972
Tech Master
iTrader: (2)
my car is listed on the FS section. Let me know.
http://www.rctech.net/forum/r-c-item...f-goodies.html
If posting the link is not allowed, iam sorry I did not know, Ill be glad to remove it.
http://www.rctech.net/forum/r-c-item...f-goodies.html
If posting the link is not allowed, iam sorry I did not know, Ill be glad to remove it.
#1973
Hey Franko, I have a set of these, but I haven't tried them yet, I think they are comperable to the standard Tamiya set, just shorter for more tuning area.
#1975
#1976
#1977
Tech Fanatic
iTrader: (10)
#1979
Tech Elite
iTrader: (89)
Join Date: Aug 2009
Location: " The World's Most Famous Beach "
Posts: 2,307
Trader Rating: 89 (100%+)
traction rolling
I have horrible traction roll. It's only On one hairpin after a chicane that I can speed through . I am running 17.5r 2* rear 2.5 front camber yokomo yellow damper oil.yellows front ,blues in the rear ,stiffest sway in the rear, med up front. I was running ifs until I realized the class has no weight min and tc bodies are allowed with touring wings. I'm going to run upright to save 123 grams and hep with the inconsistency.
Any hints? If I raise the spring rate, it negatively affects my straight line . My speed cannot be rivaled.
Any hints? If I raise the spring rate, it negatively affects my straight line . My speed cannot be rivaled.
#1980