Yokomo 1/12 MR4-TC Mini
07-16-2003, 01:23 PM
#136
can you provide links to the websites with mini conversion?
07-16-2003, 01:35 PM
#137
nice, but they look like 1/10 scale , the Yok mini is a 1/12 tourer
07-16-2003, 01:58 PM
#139
they are all the size of a M- chassis, look bigger cos they have smaller wheels .
they are usully using M03 or MiniRS4 suspension parts that they mix with the drivetrain of a 1/10tourer and a home made chassis plate, have to find a smaller belt or to shorten the shaft .
they are usully using M03 or MiniRS4 suspension parts that they mix with the drivetrain of a 1/10tourer and a home made chassis plate, have to find a smaller belt or to shorten the shaft .
07-16-2003, 06:25 PM
#140
Those Mini's do look like 1/10. But I do believe they are 1/12. I am totally impressed with how they were able to put 6 cells and a shaft drive!
07-16-2003, 07:33 PM
#141
Tech Fanatic
iTrader: (56)
yeah...thats the intresting bit
Yeah, thats the intresting part. That and the fact that most of the 1/10 mr4TC parts are interchangable with the 1/12 touring car implys that the car has a cut down chassis and smaller bulkheads, but the rest of the equiptment is 1/10.
What I am planning on doing is I have an extra 1/10 MR4TC Worlds car...not worth it to sell it, so it's gonna be my donor car for parts.
All I need are measurements or good solid pics of the bottom chassis...anyone able to send or post some pics?
This and my clod project are gonna keep me busy while my fiancee is pregnant, since I can't hang out anymore =)
What I am planning on doing is I have an extra 1/10 MR4TC Worlds car...not worth it to sell it, so it's gonna be my donor car for parts.
All I need are measurements or good solid pics of the bottom chassis...anyone able to send or post some pics?
This and my clod project are gonna keep me busy while my fiancee is pregnant, since I can't hang out anymore =)
07-16-2003, 07:57 PM
#142
Originally posted by Lars Johnson
sorry, i meant it doesn't have adjustable droop, except for limiting the shocks internally.. that would be something that an updated/aftermarket chassis could incorporate.. BUT, it doesnt matter that much right now, just getting it on the track is enough for me..
We're running our first official 19T Mini class tomorrow nite, hopefully we'll be able to get a few pics for ya'll to see
sorry, i meant it doesn't have adjustable droop, except for limiting the shocks internally.. that would be something that an updated/aftermarket chassis could incorporate.. BUT, it doesnt matter that much right now, just getting it on the track is enough for me..
We're running our first official 19T Mini class tomorrow nite, hopefully we'll be able to get a few pics for ya'll to see
07-17-2003, 12:49 AM
#143
Originally posted by tamiyadriver
what is the average price you guys paid on these? i want one pretty bad, just trying to see how much... thanks!!
what is the average price you guys paid on these? i want one pretty bad, just trying to see how much... thanks!!
We only ended up with 4 racing tonite, a few guys didnt have the time to finish them up so.. We should have a grip more next week with all the interest that was shown in them tonite.. Hopefully i'll get a chance to post some pics tomorrow at work..
The only issue so far was droop and ride height.. 2 of us were traction rolling a LOT, but that can be adjusted with correct droop settings.. These cars are really fun, i'm pretty sure we'll get a few more for next wednesday..
07-17-2003, 12:16 PM
#144
Tech Fanatic
iTrader: (56)
ok, mini dimensions
Ok, I am goin got mockup and create a mini chassis using alunimum...
I have some drafts ready, but If anyone could help would be great.
I need the measuerments of the main chassis in mm.
I need a measurement of the width of the chassis at it's widest point and a measurement of the chassis, from the back of the rear bulkhead to the end of the carbonfiber, where it touches the front bulkhead.
Thanks in advance!
I have some drafts ready, but If anyone could help would be great.
I need the measuerments of the main chassis in mm.
I need a measurement of the width of the chassis at it's widest point and a measurement of the chassis, from the back of the rear bulkhead to the end of the carbonfiber, where it touches the front bulkhead.
Thanks in advance!
07-17-2003, 12:36 PM
#145
The main chassis is 3mm thick,
the max width is 132 mm,
length is 217mm
the max width is 132 mm,
length is 217mm