R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Like Tree1Likes
Closed Thread
 
Thread Tools Search this Thread
Old 12-30-2009, 08:55 PM   #7336
Tech Adept
 
Join Date: Jul 2009
Posts: 176
Default

Does anybody remember what "stock class" racing was like in 1990? ESCs cost around $100 (with 7 MOSFETS in them), and stock motors were around $30. With 36 or more degrees of timing (the timing went up every 3 months), the motors lasted maybe 2 race days before the comm needed cutting, and you had to use a "stock comm" lathe which reached inside the can because the motors couldn't be taken apart. (The 42 motors started slowing down in the 3rd heat, so you saved one for the main at big events.) Even after comm cutting, the magnets had lost enough strength that you still wanted a new motor to be competitive.

Now you're being offered a $129 ESC & motor that will last for years, and you're complaining?????
Kevin Marcy is offline  
Old 12-30-2009, 08:56 PM   #7337
Tech Apprentice
 
Join Date: Dec 2008
Posts: 63
Default

Didn't even need the picture.

Quote:
Originally Posted by Scottrik View Post
If I leave the helmet off it'll look JUST like me too (admit it...some of you were thinking it..."dick head" )



Lugnutz1 is offline  
Old 12-30-2009, 09:11 PM   #7338
Tech Elite
 
Greg Sharpe's Avatar
 
Join Date: Jan 2004
Location: ...building minis
Posts: 3,237
Trader Rating: 15 (100%+)
Default

For everyone who is cool with the current speeds, feel free to drop by the Maryland-to-Massachusetts VTA community for a thorough showing of just how fast a 21.5 motor can be pushed. We wear tires out in 3 racedays. When the ROAR weight limit was higher than VTA's 1450g, we were actually faster than the 17.5 cars! That kind of speed is NOT what VTA was intended to demonstrate. Be happy that no one in your area has figured out how to do this, as the racing sucks when just a few guys walk away from the field.

The closest and most enjoyable racing I have done in my 20+ years has been the slower classes. However, the most intense and exciting racing I've done is Mod TC indoors at Cleveland with 4' lanes. Notice the difference there? Many people overlook that subtle nuance about speed. VTA was and is the slow TC class. The way to maximize the enjoyment factor in slow classes is to ensure the cars are packed in like sardines. When the field stretches out b'c of higher speeds, the boredom of slow racing sets in. Plain and simple. The FDR-restrained-21.5 and high-timing ESCs allowed VTA to get away from it's original purpose, being slow for slownesses sake.

Someone once asked me why I raced VTA and Nitro TC on the same day. He didn't understand how I enjoyed such different classes. Truth be told, going slow is fun when we're breaking the sideview mirrors off eachothers cars, but stretching 2nd gear over 60+mph is exhilarating when there's a bit of breathing room between me and another racer's $1,000 nitro car! Different things at stake and different emotions make the classes worthwhile in their own right.
__________________
Why don't we endurance race more often?
Greg Sharpe is offline  
Old 12-30-2009, 09:25 PM   #7339
Tech Adept
 
Join Date: Oct 2008
Location: Great Falls, MT
Posts: 190
Default

[QUOTE=Scottrik;6784810]
I can't wait. I'll show pics of how I mount it and how it looks when I'm done. If I leave the helmet off it'll look JUST like me too (admit it...some of you were thinking it..."dick head" )

Scottrik, you've been busy stirring the pot here today. Xmas break must be to long. Then, the offer to take pics of what it looks like and how you mount it?? Ehhhh, good thing this is not the Tiger Woods Scandal forum or it would be an image I don't want to see.

Seriously, your (and many others here) support of the VTA class is honorable and appreciated. Your insights offer both shameless candor and entertainment value.

Take it easy on the Egg Nog and have a happy New Year's celebration. Catch you for some racing in January.

Aaron
__________________
Dude, Go RRReally FFFast - When something gets in your way - Turrrnn
VRacing is offline  
Old 12-30-2009, 09:37 PM   #7340
Tech Master
 
f1larry's Avatar
R/C Tech Charter Subscriber
 
Join Date: Oct 2003
Location: Buffalo Grove, IL
Posts: 1,785
Trader Rating: 17 (100%+)
Send a message via AIM to f1larry
Default

Man what a flurry in such a short time.
Not that it matters but I want to thank and congratulate Rob for making this bold move. I have not run my VTA ca for awhile and was going to stop running it going forward because of what was happening with the ESC's.

Now I can't wait to get my VTA car put back together with my GTB speedo and a Novak Ballistic motor. I think the Ballistic will work out great because now I can get a 13.5 ballistic to run GT1 in TCS and for $40 more I can get a 25.5 stator and run VTA. I could not ask for a better investment. If I can't sell my current 21.5 I will hold on to it as I have a feeling there will be a use for it in the near future (maybe a replacement for the Johnson motor)

Can't wait to paint up a new Penske Sunoco Camaro for next season.

Way to go Rob!!!!
__________________
Windy City RC Raceway & Hobbies, Arlington Heights, IL
Exotek F1R3|X-Ray T4 16|CRC WC-Xti|TT02|TA05|TL01|
f1larry is offline  
Old 12-30-2009, 10:39 PM   #7341
Tech Champion
 
Scottrik's Avatar
 
Join Date: Sep 2004
Location: Billings, MT
Posts: 6,212
Trader Rating: 245 (100%+)
Default

Quote:
Originally Posted by VRacing View Post
Ehhhh, good thing this is not the Tiger Woods Scandal forum or it would be an image I don't want to see.
See it???!!! Admit it...you want to touch it.

We've got 3 race dates scheduled in January...with this weekend being both Sat (for practice) and Sun offering far and away the most track time. Any idea which weekend?

We also need to start looking at dates for the second half of the Challenge Series...we're up by a point and looking to defend that lead!!

Have a happy and safe New Year yourself. Give our best to Jodie and the Butterfly Princess.

Scottrik
__________________
Congressmen should wear uniforms like NASCAR drivers so we can identify their corporate sponsors.

THE REVOLUTION WILL NOT BE TELEVISED -Gil Scott-Heron (1949-2011)
Scottrik is offline  
Old 12-30-2009, 10:39 PM   #7342
Tech Master
 
BadSign's Avatar
 
Join Date: Feb 2002
Location: Franklin, IN
Posts: 1,158
Trader Rating: 15 (100%+)
Default

Wow. I finally reached a point 5 pages back where I said "I'm going to skip ahead, cause i can't keep up". And it's the first time I've done that on this thread.
__________________
This is the day the Lord has made, I will rejoice and be glad in it- Psalms 118:24

World Champion Turn Marshall
BadSign is offline  
Old 12-30-2009, 10:42 PM   #7343
Tech Rookie
 
Join Date: Dec 2009
Posts: 3
Default

any can help my with my sprint 2 flux problem?
yongbum219 is offline  
Old 12-30-2009, 11:05 PM   #7344
Tech Champion
 
Scottrik's Avatar
 
Join Date: Sep 2004
Location: Billings, MT
Posts: 6,212
Trader Rating: 245 (100%+)
Default

Very possible no one is familiar with that exact car. BUT all Touring Cars respond to basically the same tuning inputs, it's just a matter of how much of what is needed for an individual chassis and to best suit your style and track.

Regardless which chassis you own, the best bet I could recommend would be to purchase the XXX-Main tuning guide or purchase/download the pretty much identical M-Power book on TC tuning. It goes through pretty much every adjustment available on your TC, explains what the effect of that adjusment is, and then provides an excellent set of decision tables to help prioritize/effect changes.

This quick-n-dirty cheat sheet compiled by Rich Chang would get you started (start with the kit base-line setup, drive it, evaluate what it's doing, then take action. I'll attach the cheat sheet but I STONGLY recommend the books. I STILL get mine out when I work on TC/VTA setups.
Attached Files
File Type: pdf Rich Changs TC setup cheat sheet.pdf (32.9 KB, 155 views)
__________________
Congressmen should wear uniforms like NASCAR drivers so we can identify their corporate sponsors.

THE REVOLUTION WILL NOT BE TELEVISED -Gil Scott-Heron (1949-2011)
Scottrik is offline  
Old 12-31-2009, 01:06 AM   #7345
Tech Elite
 
Join Date: Apr 2007
Location: Winthrop harbor
Posts: 2,293
Trader Rating: 1 (100%+)
Default

Hi guys,

I just want to make a few comments with the developements that have transpired over the last 24 hours or so within the USVTA rule set.

For those of you that do not know me, let me introduce myself. My name is Eric and I own a small shop smack dab in the middle between Chicago and Milwaukee otherwise known as Harbor Hobbies or The Track depending on who you talk to. We have been in a small sort of way involved with the USVTA since it's creation.

I commend what everyone has done to dream, think and create, which would include the group in Montana and Mimi's as well as Marty and the guys at Trackside and Doug and crew with the now national USVTA, what is the most exciting RC racing around were wins are sometimes pulled out of the hat on the last lap on the last turn and weekly battles between racers are a treat to watch and an 8 year old is battling dad for position. Go John jr.!

When this all started about 2 years or so ago VTA was almost 2 seconds a lap slower than stock TC, now it has become as little as .8 seconds slower per lap on some tracks, which in my opinion has become way to fast.

While everyone is concerned with the costs involved for the new rules in the fall of 2010, you also have to consider the hobbyshops that get caught in the middle of the "flavor of the week". ESC's,batteries, tuning aids all fall out of favor very quickly. Some shops are able to get out from under their inventory while others get stuck. I myself have (4) SS21.5's in my case right now as well as a Havoc Spec 21.5 combo with no appearant outlet.

Limiting the FDR is/was only a stop gap measure. The USORCC ( Novak Race) has set the FDR at 5.2 for VTA and no "boost" function as well as no one-ways, so this in a sense will be the first real world test case for slowing these cars down. Yes, paint may dry faster on tracks that have straights longer than 100', but the race is very rarely won during the drag race to the finish line.

Look at it this way, the ESC wars are over in VTA. We as racers do not have to worry if "Joe" is actually running a legal FDR and Bill can bring back out his GTB powered TC3 (fastest out of control VTA car I have every seen :-) ), and I can put my XBR back in a car and have some fun.

I want to thank all those who were involved in testing the 25.5 as well as all the other options that were looked at before a decision was made. I think it is the right decision in the right direction.

It's time to start planning for the USVTA Nationals and there is not much time :-)
__________________
Team Novak,Gravity RC,
ercwhtsd is offline  
Old 12-31-2009, 04:56 AM   #7346
Tech Champion
 
k_bojar's Avatar
 
Join Date: Oct 2001
Location: Philadelphia, PA
Posts: 7,009
Trader Rating: 30 (100%+)
Send a message via ICQ to k_bojar Send a message via AIM to k_bojar
Default

Quote:
Originally Posted by Scottrik View Post
Here are pics of the McAllister interior buck--Gary said it's been long enough since they really worked at selling these he didn't have any pics of an actual painted interior.
hey scottrik - do you happen to know the part number for this? I'm gonna ask my LHS to see about getting them in..didnt see it on Gary's site

they look super detailed AND have the driver on the correct side

not too concerned about the helmet - everyone today is supposed to wear a full faced helmet anyways
__________________
Bodies By Bean | Team Belly
k_bojar is offline  
Old 12-31-2009, 07:01 AM   #7347
Tech Initiate
 
Daddy'o's Avatar
 
Join Date: Jul 2009
Posts: 46
Default

Quote:
Originally Posted by Kevin Marcy View Post
Does anybody remember what "stock class" racing was like in 1990? ESCs cost around $100 (with 7 MOSFETS in them), and stock motors were around $30. With 36 or more degrees of timing (the timing went up every 3 months), the motors lasted maybe 2 race days before the comm needed cutting, and you had to use a "stock comm" lathe which reached inside the can because the motors couldn't be taken apart. (The 42 motors started slowing down in the 3rd heat, so you saved one for the main at big events.) Even after comm cutting, the magnets had lost enough strength that you still wanted a new motor to be competitive.

Now you're being offered a $129 ESC & motor that will last for years, and you're complaining?????
OMG! Does anyone remember the mid-80's when the hot set-up was a Parma resistor from a slot car controller with a phosphar/bronze wiper mounted to a servo as a speed controller?

Times have changed. Technology has changed and the hobby has continued to evolve with those changes... and still survived!

Not having raced an R/C car in over two decades, I welcome reentering the sport on a level playing field and at a slower pace. One thing that apparently has not changed is the inability to please everyone, everywhere and all the time.

Just my $0.02...

Daddy-o
Daddy'o is offline  
Old 12-31-2009, 07:15 AM   #7348
Tech Champion
 
Scottrik's Avatar
 
Join Date: Sep 2004
Location: Billings, MT
Posts: 6,212
Trader Rating: 245 (100%+)
Default

Quote:
Originally Posted by k_bojar View Post
hey scottrik - do you happen to know the part number for this? I'm gonna ask my LHS to see about getting them in..didnt see it on Gary's site

they look super detailed AND have the driver on the correct side

not too concerned about the helmet - everyone today is supposed to wear a full faced helmet anyways
It is the #423 Stock Car Interior and Driver as called out as a suggestion in the new rules sheet.

I just got an e-mail from Gary McAllister this morning that he looked again for a painted sample without luck so he may paint one up to put on the site. It's been a LONG time since I've painted a lexan interior so I'm really looking forward to it. I've never really been very good at that sort of thing but some folks can really make art on these. The stuff I remember is that you paint the helmet and the gauge faces on the back (bottom) side so they have high gloss (like when you paint a body) and paint the rest on the top side so the driver doesn't look like he's wearing a plastic suit (a la Imperial Storm Troopers) and the interior panels don't look like they've been clear-coated and Simonized.
__________________
Congressmen should wear uniforms like NASCAR drivers so we can identify their corporate sponsors.

THE REVOLUTION WILL NOT BE TELEVISED -Gil Scott-Heron (1949-2011)
Scottrik is offline  
Old 12-31-2009, 07:29 AM   #7349
Tech Master
 
TwoTone's Avatar
 
Join Date: Jun 2008
Location: Maryland
Posts: 1,002
Trader Rating: 12 (100%+)
Default

Quote:
Originally Posted by RC-ProSpeed View Post
To me, it just seens that the rules are been base on just one region or maybe two... Should have take in consideration other regions...
Don't get me wrong, I think the rules will benefit new comers in the budget and provide close racing, but as I explain in my post yesterday the new rules wont work for me. (at the moment)

Now just wait and see if ROAR changes their rules for TA... if they don't change them it'll probably help some tracks to post the rules that benefit the most to them and keep their existing local racers
You guys have also lost people like me, that came back into RC because of VTA and after watching you all go high end chassis and electronics, remembered the past and left.

Last edited by TwoTone; 12-31-2009 at 08:01 AM.
TwoTone is offline  
Old 12-31-2009, 07:36 AM   #7350
Tech Adept
 
Join Date: Jul 2009
Posts: 176
Default

Quote:
Originally Posted by f1larry View Post
... If I can't sell my current 21.5 I will hold on to it as I have a feeling there will be a use for it in the near future (maybe a replacement for the Johnson motor) ...
After a while, all the "software geeks" at the ESC companies will eventually get their performance back to a relatively level playing field (the laws of physics can only go so far). Then, when everybody's 17.5 class is faster than 13.5 used to be, there will be the mass cry of "Stock's too fast" and the 21.5 (or maybe 25.5) will become the "new" stock. At least that's what my crystal ball says...
Kevin Marcy is offline  
Closed Thread

Similar Threads
Thread Thread Starter Forum Replies Last Post
Georgia Vintage Trans Am Racing shadow102 Georgia Racing 725 02-24-2012 09:56 AM
Vintage Trans Am Scottrik Electric On-Road 47 02-24-2012 08:21 AM
Vintage Trans-Am TC hlpressley R/C Items: Wanted to Buy 5 10-23-2008 04:00 PM
Thursday Vintage Trans Am racing at Victory in Green Bay Brian F Wisconsin & Illinois Racing 13 05-10-2008 08:37 AM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 10:25 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net