Stock 27 turn
11-30-2007, 10:07 AM
#1
Stock 27 turn
Any idea on what is best I am thinking of changing the front of my t2007 but cant decide what to put in it for stock 27 turn racing.
A Oneway, Spool or diff
Any advice would be good as I have little time to get my car ready for racing on sunday week.
A Oneway, Spool or diff
Any advice would be good as I have little time to get my car ready for racing on sunday week.
11-30-2007, 10:16 AM
#2
If racing on carpet, use the diff.
11-30-2007, 10:18 AM
#3
One other thing If you use a diff shouldd you runn any auto roll on an Icube?
11-30-2007, 11:04 AM
#4
On my Tekin FX Pro, I dialed in some "Push Control" so that there is no drag brake and the car will roll easier through the turns without me applying throttle. It is the equivalent of increasing the subtrim on the throttle until you have to hold the brake to stop the car from creeping on its own at the start (on a Novak GTX).
If that is what "Auto Roll" is on an ICube, the short answer is "yes".
If that is what "Auto Roll" is on an ICube, the short answer is "yes".
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
