R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric On-Road (https://www.rctech.net/forum/electric-road-2/)
-   -   What brushed motor? (https://www.rctech.net/forum/electric-road/183235-what-brushed-motor.html)

charley 09-26-2007 03:12 PM

What brushed motor?
I run stock class, so 27 turn. I hear from many people that brand X is best or brand Y is best. Running on a pretty open (not to technical) asphalt layout. I am not at the point where I want to drop a couple hundred on a new BL system so I wanted some feedback! Any help or recommendations will be appreciated.

Kropy 09-26-2007 03:17 PM

I would recommend a tuned stock motor from EA Motorsports www.teameamotorsports.com

convikt 09-26-2007 03:20 PM

Originally Posted by Kropy (Post 3709121)
I would recommend a tuned stock motor from EA Motorsports www.eamotorsports.com

I agree, about the best Ive seen (good batteries as well). There was another good one , but they went under

charley 09-26-2007 03:37 PM

Ok I checked out the site, no clue what the C,M,R,And X stands for any ideas?

turboxrayt1fk05 09-26-2007 04:38 PM

check out www.teamkwik.com their stock motor got tons of rip.:ha::sneaky:

KE4PJO 09-26-2007 04:56 PM

Just about any stock motor "tuner" will sell you a good motor. Check with the local racers, see what they are doing. Or talk to your local hobby store, I'm sure they will help also.

tandman 09-26-2007 06:56 PM

Charley.....check out t-bang.ca If you are running on a wide open track the X-Stock is a good bet....use f-brushes and red springs. Gear for a final drive ratio of about 6.8-7.0 to start. You can also trim the trailing edge of the brushes for a little extra rip.

parnelli97 09-27-2007 09:16 AM

Go with brand X, it sounds cooler than brand Y. Brand Y sounds like a lubricant... ;)

charley 09-27-2007 12:47 PM

Went to my LHS last night to pick up some parts, the guy there is super cool. I asked what kind if any "tuned motors" he had. They don't really carry any, however he did give me a bunch of good info to "tune" my own. All the guys that I race with -1 run brushless, so I want to be able to stick with the pack running brushed, and of course lay it down on them once in awhile.
A final drive of 6.8-7.0 is pretty tall. wouldn't that just put a bunch of strain on the motor? Wouldn't I have to rebuild it more often and risk damaging my ESC?

All times are GMT -7. It is currently 10:32 AM.

Powered By: vBulletin v3.9.3.6
Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.