Phoenix - The CEFX C12 is Reborn!!
02-07-2009, 09:24 AM
#153
Tech Adept
02-07-2009, 11:15 AM
#154
drover - Really, you only need t-bars. We do make a "Japan Spec" chassis that is 2.5mm graphite that is more flexable for asphalt but it depends on how low the grip is if you need it or not.
beyond - There isn't one in production but we are starting to do some testing, especially with the single cell lipo on the horizon.
beyond - There isn't one in production but we are starting to do some testing, especially with the single cell lipo on the horizon.
02-08-2009, 02:34 AM
#155
Tech Adept
drover - Really, you only need t-bars. We do make a "Japan Spec" chassis that is 2.5mm graphite that is more flexable for asphalt but it depends on how low the grip is if you need it or not.
beyond - There isn't one in production but we are starting to do some testing, especially with the single cell lipo on the horizon.
beyond - There isn't one in production but we are starting to do some testing, especially with the single cell lipo on the horizon.
02-17-2009, 08:41 PM
#156
Tech Fanatic
iTrader: (1)
Join Date: May 2003
Location: Was in Toledo, OH now Battle Ground, WA
Posts: 833
Trader Rating: 1 (100%+)
So is there a conversion kit for the '05 version?
If I can find it.......
How you been?
If I can find it.......How you been?
02-22-2009, 03:06 AM
#157
Tech Adept
Hi Josh if i want to use Li Po in the future with the Phoenix T-Bar can i do it or you release a conversion kit for Li Po use only.
02-22-2009, 05:10 AM
#158
Hey guys, I got a chance to see the 10th scale pan car from CEFX. All I can say is WOW!!! It looks pretty neat, and has a very simple layout. It reminds me a lot of the Xray X10 pan car, but more green. 
I think it is gonna be a hit. However, I wish he would have made it "Optimized" for LiPo. It looks like it is going to use 4-cells only. 
I think it is gonna be a hit. However, I wish he would have made it "Optimized" for LiPo. It looks like it is going to use 4-cells only.
02-25-2009, 11:26 PM
#159
Tech Adept
Hi Josh any news about the CEFX website?
02-27-2009, 08:38 AM
#160
Started building my Phoenix and I have a few questions / observations. Any help is appreciated.
1.) Diff side hub is machined on the wheel side...I'm assuming its to get a proper track width...was this neccessary for Jaco or Parma rims? Anyone had a problem with the fewer threads stripping?
2.) I really like the solid feel of the rear pod. Very nice.
3.) Wish the chassis and rear pod bottem plate was drilled for the the IRS balance buttons.
4.) My kit came with an old style antenna / shock mount versus the newer ASC design. Is this the one ot ue or should I just get the newer style. With the older style mount, the shock distance is much greater than anything I've used in the past.
5.) Josh. Please post your set-up for the Snowbirds.
Overall, I'm excited to try a t-bar chassis again and I really like the design.
1.) Diff side hub is machined on the wheel side...I'm assuming its to get a proper track width...was this neccessary for Jaco or Parma rims? Anyone had a problem with the fewer threads stripping?
2.) I really like the solid feel of the rear pod. Very nice.
3.) Wish the chassis and rear pod bottem plate was drilled for the the IRS balance buttons.
4.) My kit came with an old style antenna / shock mount versus the newer ASC design. Is this the one ot ue or should I just get the newer style. With the older style mount, the shock distance is much greater than anything I've used in the past.
5.) Josh. Please post your set-up for the Snowbirds.
Overall, I'm excited to try a t-bar chassis again and I really like the design.
03-08-2009, 01:49 AM
#161
Tech Adept
Hey guys I want to explain me somebody the deference between standard ,medium and long T-Bar for the Phoenix and what track condition's we use any of the above?
03-25-2009, 04:41 AM
#162
Tech Adept
The new link car who Josh drives in 2009 ROAR Carpet Nationals they will be the new Phoenix car?
If yes there will be Conversion Kit from T-BAR to Link one?
04-02-2009, 12:38 PM
#163
Tech Adept
Hi guys
I want to know were can i find assembly manual for the Phoenix 1/12 car because I have lost mine.
Also if you have any set up for low bite asphalt track.
I want to know were can i find assembly manual for the Phoenix 1/12 car because I have lost mine.
Also if you have any set up for low bite asphalt track.
04-02-2009, 01:05 PM
#164
Tech Master
I still have the original CEFX C12 car here at home that I would like to run again. I thought it was a brilliant car to drive but used to have a problem with the flex plate staying flex upwards towards the end of a run, giving me some very coned front tyres! Does anyone know where I could find a assembly book for this chassis please? Cheers guys, Chris.
04-02-2009, 04:36 PM
#165
Chris, Yes I thought it was a great car also, one of the fastest cornering cars I have ever owned , I believe I have a manual, would have to scan and then upload somehow??? If interested also I have a Ton of parts and extras for that older car, also a spare chassis complete,minus axel, let me know if interested. will see if I can get the manual and maybe some tips.
