4LikesTamiya TRF416 / TRF416WE / TRF416X
12-07-2007, 05:04 AM
#451
ima leave all the measurements to gizmo...ima have fun with the blue bits for a while before assembly. Tamiya Malaysia rocks :-)
12-07-2007, 06:45 AM
#454
The layout of the center shaft is like the new Xray T2008. I have heard that there is an issue with the T2008 where the battery touches the pinion and spur gears.
Gizmo, can you perhaps show a picture of the 64P and 48P gears setups with a battery installed?
Also, is that 48P spur gear you have installed a special one, or is it just a regular one? Did it fit without issues?
Gizmo, can you perhaps show a picture of the 64P and 48P gears setups with a battery installed?
Also, is that 48P spur gear you have installed a special one, or is it just a regular one? Did it fit without issues?
12-07-2007, 07:09 AM
#455
Tech Apprentice
Miccal
That a normal xenon spurgear on the blue screw car other car
RW spurgear on the titanium screw car
It fits without issues.
but will do a test tonight,or ask mr Vd Hagen his car is already in race mod!!
koE. don`t have a car here..(ya I know 5 cars and not 1 when you need one) (-:
So Ill will measure it tonnight.
@Cato54 yes they come with alu cvd all around,42 steel will fitt with the first type one way axles(53590)
regards
C.
That a normal xenon spurgear on the blue screw car other car
RW spurgear on the titanium screw car
It fits without issues.
but will do a test tonight,or ask mr Vd Hagen his car is already in race mod!!
koE. don`t have a car here..(ya I know 5 cars and not 1 when you need one) (-:
So Ill will measure it tonnight.
@Cato54 yes they come with alu cvd all around,42 steel will fitt with the first type one way axles(53590)
regards
C.
12-07-2007, 08:03 AM
#456
Hey guys, why haven't got anybody to asking for spool?
The idea i had made before didn't work?
The idea i had made before didn't work?
12-07-2007, 09:30 AM
#457
Miccal
That a normal xenon spurgear on the blue screw car other car
RW spurgear on the titanium screw car
It fits without issues.
but will do a test tonight,or ask mr Vd Hagen his car is already in race mod!!
koE. don`t have a car here..(ya I know 5 cars and not 1 when you need one) (-:
So Ill will measure it tonnight.
@Cato54 yes they come with alu cvd all around,42 steel will fitt with the first type one way axles(53590)
regards
C.
That a normal xenon spurgear on the blue screw car other car
RW spurgear on the titanium screw car
It fits without issues.
but will do a test tonight,or ask mr Vd Hagen his car is already in race mod!!
koE. don`t have a car here..(ya I know 5 cars and not 1 when you need one) (-:
So Ill will measure it tonnight.
@Cato54 yes they come with alu cvd all around,42 steel will fitt with the first type one way axles(53590)
regards
C.
12-07-2007, 09:48 AM
#458
Tech Adept
If the inner diameter is 24mm then it is the same as 415. I test mounted the pulley the other way around on the spool and fits within the bulkheads of a 415. Maybe this will work as a temporary fix on 416 as the pulley is only supported by the screws.
12-07-2007, 10:19 AM
#459
Tech Master
I think there is a pallete missing from Tamiya's warehouse
12-07-2007, 10:43 AM
#460
Tech Apprentice
credit to mr orange..
sorry guy`s for the dirty spool, it was the only one i could find in a short notice
sleeves need remodeling.
C.
sorry guy`s for the dirty spool, it was the only one i could find in a short notice
sleeves need remodeling.
C.
12-07-2007, 12:59 PM
#461
Gizmo- What the heck? What spool is that?
12-07-2007, 01:43 PM
#462
12-07-2007, 01:53 PM
#463
gizmo, any chance you can post a scan of the back page from the manual so we can see a list of spares/option parts? Thanks mate.
12-07-2007, 02:19 PM
#464
Tech Apprentice
iTrader: (12)
Hello Gizmo i was wondering what size spur are you using for the car with the Xenon spur?
And what are the suspension block order, so far from what i've seen, starting from the front of the car is 1B then 1XB . What are the rear block? I am assuming they are 1A and 1D. If so, do the standard (plastic) rear uprights have any natural toe angle?
Thank you
And what are the suspension block order, so far from what i've seen, starting from the front of the car is 1B then 1XB . What are the rear block? I am assuming they are 1A and 1D. If so, do the standard (plastic) rear uprights have any natural toe angle?
Thank you
12-07-2007, 02:44 PM
#465
Hello Gizmo i was wondering what size spur are you using for the car with the Xenon spur?
And what are the suspension block order, so far from what i've seen, starting from the front of the car is 1B then 1XB . What are the rear block? I am assuming they are 1A and 1D. If so, do the standard (plastic) rear uprights have any natural toe angle?
Thank you
And what are the suspension block order, so far from what i've seen, starting from the front of the car is 1B then 1XB . What are the rear block? I am assuming they are 1A and 1D. If so, do the standard (plastic) rear uprights have any natural toe angle?
Thank you
