4LikesTamiya TRF416 / TRF416WE / TRF416X
02-27-2009, 04:47 PM
#4576
What shop..... I need some in the worst way... This is total BS, cannot get a part for the car.. the way it comes from the factory...
I have taken some from the 415 spool, and "manufactered" my own spool cups, not pretty, but work better then nothing.
I have taken some from the 415 spool, and "manufactered" my own spool cups, not pretty, but work better then nothing.
Originally Posted by dameetz
Is it really? My LHS has some stock, in fact I just bought mine for spare last week.
Last edited by TimPotter; 02-28-2009 at 06:30 AM.
02-27-2009, 09:38 PM
#4577
i found one spare outdrive and replaced the worst of the two and it did get rid of some of that chainsaw effect also need to find some four degree c hubs i only got four for the right and none for the left.i resorted to using tb03 c hubs.
02-28-2009, 08:15 AM
#4578
Originally Posted by CHRIS CHAVEZ
Do you know what the 416WE One Way part number is? 
Item #49492
Radio Control PartsTamiya Hop-Up Parts
Price: $48.00
I like to use that one too..
RC Front One Way Set - DB01
Item #54017
Radio Control PartsTamiya Hop-Up Parts
Price: $58.00
http://www.tamiyausa.com/search.php?q=one+way+&x=39&y=3
make sure you get the same pullies on both ends .. DUH!
The new ones are 37 teeth. and the center is an 18.
02-28-2009, 08:29 AM
#4580
Originally Posted by TimPotter
What shop..... I need some in the worst way... This is total BS, cannot get a part for the car.. the way it comes from the factory...
I have taken some from the 415 spool, and "manufactered" my own spool cups, not pretty, but work better then nothing.
I have taken some from the 415 spool, and "manufactered" my own spool cups, not pretty, but work better then nothing.
02-28-2009, 08:46 AM
#4581
Originally Posted by jonest
The spool cup shatterred!!! into pieces.... I'm wondering whether can use the metal cup from TA05... Any1 has done this??
02-28-2009, 09:05 AM
#4582
Originally Posted by TimPotter
What shop..... I need some in the worst way... This is total BS, cannot get a part for the car.. the way it comes from the factory...
I have taken some from the 415 spool, and "manufactered" my own spool cups, not pretty, but work better then nothing.
I have taken some from the 415 spool, and "manufactered" my own spool cups, not pretty, but work better then nothing.
02-28-2009, 09:51 PM
#4584
Originally Posted by John St.Amant
RC TRF416 Center One-Way Set
Item #49492
Radio Control PartsTamiya Hop-Up Parts
Price: $48.00
I like to use that one too..
RC Front One Way Set - DB01
Item #54017
Radio Control PartsTamiya Hop-Up Parts
Price: $58.00
http://www.tamiyausa.com/search.php?q=one+way+&x=39&y=3
make sure you get the same pullies on both ends .. DUH!
The new ones are 37 teeth. and the center is an 18.
Item #49492
Radio Control PartsTamiya Hop-Up Parts
Price: $48.00
I like to use that one too..
RC Front One Way Set - DB01
Item #54017
Radio Control PartsTamiya Hop-Up Parts
Price: $58.00
http://www.tamiyausa.com/search.php?q=one+way+&x=39&y=3
make sure you get the same pullies on both ends .. DUH!
The new ones are 37 teeth. and the center is an 18.
I only have asphalt tracks to run on and the spools typically dominate the field. Although, if i can't get anymore spool parts in the near future i may have no option but to run a oneway.
02-28-2009, 10:41 PM
#4586
Originally Posted by syndr0me
Is a slipper spool totally out of the question? The spool is a pain in the ass with its constant need for attention. It's like a needy girlfriend without the sweet release.
02-28-2009, 10:44 PM
#4587
Originally Posted by syndr0me
Is a slipper spool totally out of the question? The spool is a pain in the ass with its constant need for attention. It's like a needy girlfriend without the sweet release.
With that being said.........this was a crappy example cause if someone else with rebuild your diff and give it that attention......I SAY LET THEM
03-01-2009, 10:01 AM
#4589
i need some help
can someone recommed to me a good handling Tamiya Body for the TRF 416 chassis. i need one for the tamiya TCS race thanks.
03-01-2009, 10:11 AM
#4590
Tech Master
the older ARTA NSX is one of the best choices for TCS. Not sure if TCS allows for it, but the lightweight version is really good.
