Xray T2'008

You're on Page 53 of 130
Go to
  • looking for prs 108 spurs.. know if anyone has any in stock?
  • Quote: looking for prs 108 spurs.. know if anyone has any in stock?
    Not a clue but just out of curiuosity why prs specifically?
  • its for the t2 07, have been using them for the past few yrs and now with the brushless i need to fit a 38-39 pinion and cant use the 112/114/116 i was using before.. does the RW have the hole in the spur to get to the motor screw?
  • On the Nexxus site the pics for the 108 to 128 spurs do....
  • only thing i broke all of last season was the cvd pins. and the front caster blocks.. ran my 007 after a three hour nitro enduro.. my team used my radio.. dialed up all the dual rates.. and for my 007 it ended up being like 117% when i usually use about 60-70.. ended sheering them.. other than that no breakage.. I try not to hit things while going fast.. lol
  • I try not to hit anything but unfortunately there is a hump on the sweeper coming onto the straight. This also happens to be the fast line and you get to 2 wheel it onto the straight quit a bit.....sometimes you drift a bit far and catch the board...
  • Quote: looking for prs 108 spurs.. know if anyone has any in stock?
    112-118t only !
  • Quote: looking for prs 108 spurs.. know if anyone has any in stock?
    Shumacher usa has RW spur gears which will work.. Combined with a 2mm ball alen your set
  • Quote: I try not to hit anything but unfortunately there is a hump on the sweeper coming onto the straight. This also happens to be the fast line and you get to 2 wheel it onto the straight quit a bit.....sometimes you drift a bit far and catch the board...
    Pretend its offroad and square up to the bump so it doesn't push you out as far if you HAVE to hit it... and dont crash lol
  • 1K Woven Carbon Graphite
    2.5mm EU 5 Cell Chassis ( more balance & front belt don't touch chassis ...)
    & 1.5 or 2 mm upper deck

    Xray T2'008-rch-xr08eu5l.jpg   Xray T2'008-rch-xr08euup.jpg  

  • Quote: 1K Woven Carbon Graphite
    2.5mm EU 5 Cell Chassis ( more balance & front belt don't touch chassis ...)
    & 1.5 or 2 mm upper deck
    How about cutting a 2.25 or 2.2 chassis.. I would buy one lol
  • Quote: How about cutting a 2.25 or 2.2 chassis.. I would buy one lol
    yes have 2.25mm
  • Quote: yes have 2.25mm
    link please?
  • Quote: link please?
    www.rcmarket.com.hk

    EU 6 Cell chassis , F & R shock tower ... after 2 week release
  • Quote: www.rcmarket.com.hk
    I looked at your site, and all i saw was the 2.5 chassis... Didn't see 2.25

Similar Threads