Xray T2'008

You're on Page 116 of 130
Go to
  • Could someone please do me a small favor? I need a straight line measurement of the distance between the 2 holes in the chassis that you'd use for the optional carbon battery hold down. Thinking about using it on a different chassis.
  • Quote: They are GREAT!!!!!! Don't go on the track without one
    I do, and no scratches. But then again, I race on carpet.
  • another xray T2 008 US spec user here,
    pics of my drifter







  • What is the final drive ratio of the T2 008 EU?

    Does anyone have a battery strap and mounting posts for sale for a T2 008/009?
  • Quote: What is the final drive ratio of the T2 008 EU?

    Does anyone have a battery strap and mounting posts for sale for a T2 008/009?
    You got PM.
  • Has anyone tried to run a 38t spool and diff with the 20t idle gears on a 008 EU, and if so what belts did you use to make it work? Part numbers if possible.

    Thanks
  • Quote: Has anyone tried to run a 38t spool and diff with the 20t idle gears on a 008 EU, and if so what belts did you use to make it work? Part numbers if possible.

    Thanks
    This is what you are looking for.

    http://www.teamxray.com/teamxray/pro...2038T%20Pulley
  • Quote: This is what you are looking for.

    http://www.teamxray.com/teamxray/pro...2038T%20Pulley
    It seems like he already has the pulleys, so instead of the whole conversion set, he can get:
    305432 - High-Performance Kevlar Drive Belt Front 3 x 513mm (for conversion set)
    305446 - High-Performance Kevlar Drive Belt Front 3 x 189mm (for conversion set)
  • Does anyone know the difference between the 007 and 008 diffs? I'm picking up a 008 and want to know if I can use or convert the 2 007 diffs I have.
    Also, is there a list of parts that are different somewhere so I dont get rid of 007 parts that I later end up buying again??

    Thanks.
    Kevin
  • Quote: What is the final drive ratio of the T2 008 EU?
    the car ratio before you factor int he spur and pinion is 1.7 I THINK

    Alex
  • Quote: Does anyone know the difference between the 007 and 008 diffs? I'm picking up a 008 and want to know if I can use or convert the 2 007 diffs I have.
    Also, is there a list of parts that are different somewhere so I dont get rid of 007 parts that I later end up buying again??

    Thanks.
    Kevin
    You should find a conversion chart on the team xray site with all the cross over parts. Save link as..

    http://www.teamxray.com/teamxray/sho...p?file_id=2667


    You will find not a lot of parts swap between an 007 and a 008.
  • Quote: Does anyone know the difference between the 007 and 008 diffs? I'm picking up a 008 and want to know if I can use or convert the 2 007 diffs I have.
    Also, is there a list of parts that are different somewhere so I dont get rid of 007 parts that I later end up buying again??

    Thanks.
    Kevin
    the pulley is alot further to the right of the car, so the long outdrive is longer and the short one is shorter compared to the 07 diff. even if you spaced it across it wouldnt work as the driveshafts wouldnt go into the outdrives properly...
  • Quote: You should find a conversion chart on the team xray site with all the cross over parts. Save link as..

    http://www.teamxray.com/teamxray/sho...p?file_id=2667


    You will find not a lot of parts swap between an 007 and a 008.
    Quote: the pulley is alot further to the right of the car, so the long outdrive is longer and the short one is shorter compared to the 07 diff. even if you spaced it across it wouldnt work as the driveshafts wouldnt go into the outdrives properly...
    Thank you for the link. That is just what I was looking for. Bummer on diffs...guess I will be unloading quite a few 007 spares.
  • Quote: Thank you for the link. That is just what I was looking for. Bummer on diffs...guess I will be unloading quite a few 007 spares.

    I did installed my 007 diff and got it to work.the belt is off set and there was no rubbing......
    I didn't have any problem with the out drive
    ....
  • Yup, the diffs and spool will fit...not perfect, but definitely acceptable. In fact, most guys here with 007's have the 305184 Composite 008 Spool installed!

Similar Threads