what 1/12 car is this
 

trying to see what 1/12 car is this need help asap

can you post some better pictures

looks like an old HPI.the front end and t bar pivots are definately old school HPI

Looks like a Trinity car.

see do this help the guy said it will a black widow but i look up one and it look thing like it i just need to know for i can get some body post

Trinity...you can tell by the rear pod.

that what the guy said it was a trinity car but i do not know what one

if it is trinity what one and can some one get me a part # on the body post

I'm almost sure there's no part support for that car anymore. You're going to have to sub out another mfg's body post. Asc. has a bunch of different sizes, and I believe Cobra still makes the real beefy ones.

what car is this

I believe Trinity called this a Switchblade. They had another model with purple flek in the chassis and it was the Spahett edition.

Why is it a 6-cell chassis?

yes it is the 6-call chassis

look like it is a switchblade is it any where to get part for it ? if or let me know

definately a switchblade:

http://www.angelfire.com/mi/mikem/im...witchblade.jpg

parts? i'd say ebay.. look on the trinity forums... and other ae12 parts?

I see that it is one, I was asking why. When was 6-cell raced in 12th scale?

You should be able to use any body mounts of the correct length. Try going to your local hobby shop and ask them if you can look through their box of body mounts. I'm sure you'll find what you need.

As for the six cell chassis, that isn't much of a surprise. Even the RC12L3 had six slots.

Back in the late eighties early ninties 1/12 was run with six cells. Remember that back then 1200 nicads were the only cells in use so you needed six cells to run any speed. Once the switch to nickle metal was made and the mah levels were raised four cell became the norm.