hardadz

iTrader: (3)

Hey guys
I need some help on this one. Have any of you used products from GPM, and if you have I am curious as to the quality and finish of the products that you have purchased. Also if you have had problems with fit as to the particular products that you bought.
Thanks

R C king

I have ,there nice products.

Fire

you can try GPM's product~

but mind you that GPM's main customer source is new customers

Grizzbob

iTrader: (2)

I've only tried one thing from them(their shaft one-way for the TC3, works like the layshaft one-way on belt-driven cars), & I liked it quite a bit, quality is very good. The only thing I was less pleased with was that it took quite a bit of custom fitting to get the shims in the proper order & position it properly so that the bevel gear meshes correctly with the diff gear(I think it took me about 2 hours or so of trial-&-error to get it right). But once I got it right, it worked great(just would've preferred some better instructions & more of the shims it needed so we wouldn't have to scavenge some from the original kit parts)....

Bappe

I got the rear alu hub carriers from GPM to my TC3, they looked nice, but the holes for the bearings were 0.2-0.3mm to big! so i had to put a thin line of superglue around in the holes to get the bearings to fit properly. Other then that the other things i have seen and had from GPM have been good.

Cole Trickle

I saw a GPM Pro2 at the last race I was at - nice car, seemed to perform well also.