Mr. MR4

iTrader: (8)

trinityracinnut - do u have the part numbers of the springs you use on the motor

Also, what gearing do u recommend?

StephenSobottka

iTrader: (8)

I use trinity red(RC4389s) springs, and trinity green(RC4028s) springs.

MR- what car are you running? foams(size also) or rubber? size of track? type of track?

Mr. MR4

iTrader: (8)

I'm running at TC3 now (Rubber Tryres) - I havent tried your motor set up yet but I will be trying it out when I manage to get The Chameleon motors.


Regarding the gearing - I will be racing at the KO Grand Prix in August & I was told that the track has a 40 Foot straight!

Thanks for your help

StephenSobottka

iTrader: (8)

MR- I would gear this motor at a 7.7 to start with then, gear it till when a 5 min run is over, u can hold ur thumb on it for at least 2 secs.

SalvadoriRacing

trinityracinut......

do you really put teflon shims against bearings?!??!?!??!?!?

dontfeelcold

iTrader: (21)

motor heat isnt the true way to gear a motor properly. all motors get hot.(try using the thumb method in mod) the best way to see what gearing u should use is to have a look at the comm after each run. its colour indicates whether the motor is geared properly. best colour to get would be very slight pink tinge to it

Mr-s413bt

iTrader: (5)

Hey Guys.

Well i had some runs with my 19t peak dynasty on the w/e. Was 100% stock geared right up in a HPI pro3 final drive was 5.9:1

Don't ask me about roll out as i am an offroad racer .

I trued it yesterday and took very little off it, i could have kept using it (it had 14 runs on it).



Ooh that was on rubber tires aswell.

Glenn

ottoman

iTrader: (13)

Well Stephen must know something... he just TQed and won the 19 turn class at the big race in Tulsa a couple weeks ago.
Hey Stephen when did you get a Robi?