heavy

iTrader: (23)

This thread has gone strangely quiet - have the packs been submitted to ROAR yet ? Is there a problem with them ?

Cesar

iTrader: (1)

Looking for some feedback on the 3250's........



Thanks,
Cesar

Marcos.J

iTrader: (239)

Cesar i ran it today at Adrenaline and it was really good , i ran it in stock all day today and it worked very good !! I even ran it with the 3.5 and had no problems making 5 minutes!!

after 6 minutes in stock it only took like 2000milliamps to be completly charge

LOSI123

iTrader: (63)

Do the 3250's have as much punch as the 5000mah ???

Marcos.J

iTrader: (239)

they felt the same to me

syndr0me

iTrader: (32)

The fact that the cells in these packs have "MADE IN CHINA" stamped on them leads me to believe they are, in fact, not Enerland cells. Perhaps Adrian's hint back in the day was a red herring. Sneaky.

I didn't bother to Google the part number. I don't care enough, if you can believe it. The packs have been working great.

O'Brain

So far as I know, I am sure that the Enerland cells are all make in China also. The most important issue is what kind of material the cell makers are using. The material is the key to a good Lipo pack.

abailey21

iTrader: (37)

Our cells have been sent to Roar for approval

The 3250 will not have as much "punch" as the the 5000
(The number games play the same roll as round cells, where is a 3300 NiMh will not have as much punch as a 4600NiMh)

Our Packs DO have "Made in China" on them, no denying that.

I'm sorry I haven't been on here more lately, the office has been keeping me quite busy lately

aus jd 2703

iTrader: (5)

hey what chargers does schumacher recomend for use with the core lipo?
i had an ice but am looking to go 2 a cheaper smaller charger maybe 2 small chargers.
so far ive worked out since im not doing nimh any more i can do away with discharge temp cut off anything else?
the orion chargers seem good and cheap.
is there anything i should look for? cheers

aus jd 2703

iTrader: (5)

hey what chargers does schumacher recomend for use with the core lipo?
i had an ice but am looking to go 2 a cheaper smaller charger maybe 2 small chargers.
so far ive worked out since im not doing nimh any more i can do away with discharge temp cut off anything else?
the orion chargers seem good and cheap.
is there anything i should look for? cheers

Marcos.J

iTrader: (239)

i just bought one of these

http://www.allerc.com/product_info.p...oducts_id=1872

abailey21

iTrader: (37)

Core will be releasing a budget charger and full featured charger in about 2 weeks, along with power supplies (as soon as they get here in the states)

I'm a big fan of my Ice which I'll also continue to use.

Also I've been very happy with the full line of Hyperion chargers and allerc.com is a great dealer for them

aus jd 2703

iTrader: (5)

cheers adam can u give me the details on the chargers i checked the site but not much detail. im curious bout charge rates ballancing and delta peak adjustment with nimh.
i have a few nimh race packs can either charger do it? i was gonna buy one of each

abailey21

iTrader: (37)

I've got more specific specs at the shop I'll see if I can get some posted on here Monday

aus jd 2703

iTrader: (5)

sweet thats why i love schumacher. good support
slightly different question.
can i make 6 min runtime with the core 3250 packs with a 6.5 brushless?
cheers again