fly_wheel

iTrader: (9)

any tips for easy rebuilding of RCC shocks??? i have it on my 720 n S400... not really interested to make the move to change to tamiya shocks... thanks...

CanyonCarverR1

iTrader: (13)

Anybody got an S400 gear diff they can part with? I'm in California.
thx,
G

zleader_99

iTrader: (20)

Thanks for the listing of the part numbers. I guess I am lucky as I have a few of the xray belts on hand from my TRF upgrade.. I read somewhere else that the blocks are compatible too.. can you verify this..

Again thanks

yyhayyim

iTrader: (26)

No real need to change the S400 Shocks to Tamiya, Xray, or anything else!!! The RCC shocks are good enough, and so easy to set up and maintain. Dont believe the hype--unless BUtter says so...otherwise, its not needed

CanyonCarverR1

iTrader: (13)

Yep, Butter's got some good tips...did he really get that name in prison?

Tommy Bergfeldt

I looked at Xray ballends and cups and they would work perfectly, but since my lhs has to order Xray parts and the waiting time is at least 3-4 days i rather modified the originals and held the geometry unchanged (I didn't check with the pair of Xray ballends i borrowed if they would change any angles).

TeamButter

iTrader: (3)

No...not exactly......but close


As for the Xray shocks they fit perfectly. I know because I use them not because the RCC shocks are inferior, but with all the leftover stuff I have from my days with Xray it was just easier to steal from my old stuff than fill the new RCC ones... I know i'm lazy...

UK.hardcore

You cant use Xray rod end, the wheels wont fit anymore.

TeamButter

iTrader: (3)

I beg to differ. I have them on my car right now.

Korey Harbke

iTrader: (13)

DUN DUN DUUUNNNNNNNN!!!!!!!!!!!!!!

*sound of a gong*

Butter has spoken!!!!

All kidding aside... just wanted to say hi Mike is great source of information for you guys, I would listen to what he has to say

-Korey

tfracing

Hi Guys if anyone is interested in a new top deck for the S400 to fit 5000mah lipo batteries take a look www.tfracing.co.uk bulk orders for discount so get together.......always pleased to help out. the Lipo fits in
dead easy in fact it slips in, the top deck is very easy to fit in seconds, and also adds to cornering and stability of the car a much improved hop up part.

CanyonCarverR1

iTrader: (13)

Sorry if this was covered previously. Is there some LiPo packs that fit the car without modifications?

kschu

iTrader: (16)

u can use trinity lipo 3800 25c and orion lipo 3800 30c with very little bit grinding on d bulkhead.....

yyhayyim

iTrader: (26)

SMC 4000 packs fit perfect!!!

cpatel529

iTrader: (80)

I have read alot about the S400 and am really intrigued by it. Looking for a new chassis for the indoor carpet season starting soon. What hopups are people using on their cars? I read alot about Tamiya parts. What are these for?