Turbo Joe

iTrader: (41)

Unless it's a dedicated RC track...and very clean, 48p is the way to go. Every time I use 64p in a parking lot, I end up tearing up my nice 64p stuff with little tiny rocks.

minnesh

thanks guys

|JayFlores|2

iTrader: (16)

depending on the ratio i need.. i always get it right anyway with 48p

MrUnlimited

Xenon spurs and Titanium Racing pinions 64DP

RocketRacer

....64P

razzor

64 pitch is smooth and silent compared to 48 pitch but wouldnt recommend 64 if running in a parking lot or dirty dusty tracks.
48 is great for messing around and parking lot racing.
Also if going brushless would recommend 48 pitch jsut for strength.

sosidge

48, 64 is a pain to mesh right and you can always get the right ratio with 48 anyway.

Pie_robot

iTrader: (17)

64dp also has better tunabilty to the gear ratio or rollout you want

Tsquare

iTrader: (4)

With a 540 motor, the extra tunability of the 64P could be very helpful. I have used 64P for on-road racing for years without durability problems.