2LikesTamiya TA05MS
03-06-2008, 03:53 AM
#946
Can anyone recommend a pinion and spur gear combo for a 27T setup ? In door carpet, main straight max 30 metres.
03-06-2008, 05:53 PM
#948
Originally Posted by guinnes.s
after fitting a spool and about 10 minutes racing i noticed that the wheels hex's on both the front wheels have been rounded.
can it be the plastic on the wheels that is not good or something wrong with the ally hex in the car???
if i use the front diff is ok,only when using the front spool the problem appears.
thanx
Salvo
can it be the plastic on the wheels that is not good or something wrong with the ally hex in the car???
if i use the front diff is ok,only when using the front spool the problem appears.
thanx
Salvo
thanx
03-06-2008, 10:53 PM
#949
What type of wheel hub are you running and how many spacers, if any, are you using?
03-07-2008, 02:17 AM
#950
the wheel hubs are the stock 5mm and without spacers
04-12-2008, 04:10 AM
#951
Tech Rookie
Servo Mount
Hi there!
Does any one here know which aluminium servo mount to be used for TA05MS?
Item #53723 RC TB Evo IV Alum Servo Mount - Blue
or
Item #53875 RC Aluminum Servo Stay - TA05 Lightweight
Thanks.
Does any one here know which aluminium servo mount to be used for TA05MS?
Item #53723 RC TB Evo IV Alum Servo Mount - Blue
or
Item #53875 RC Aluminum Servo Stay - TA05 Lightweight
Thanks.
04-12-2008, 08:26 AM
#952
Originally Posted by @sd
Hi there!
Does any one here know which aluminium servo mount to be used for TA05MS?
Item #53723 RC TB Evo IV Alum Servo Mount - Blue
or
Item #53875 RC Aluminum Servo Stay - TA05 Lightweight
Thanks.
Does any one here know which aluminium servo mount to be used for TA05MS?
Item #53723 RC TB Evo IV Alum Servo Mount - Blue
or
Item #53875 RC Aluminum Servo Stay - TA05 Lightweight
Thanks.
04-12-2008, 09:57 AM
#953
Hi there, may I know the height clearance between the main chassis and the top deck for the 05ms? Can it take a 28mm thick lipo pack?
Thanks.
Thanks.
04-12-2008, 05:04 PM
#954
yes and no, though.
the upper deck has 26-27mm clearance. stick the lipo out a little bit, you should be able to clear the upper deck.
the upper deck has 26-27mm clearance. stick the lipo out a little bit, you should be able to clear the upper deck.
04-12-2008, 11:57 PM
#955
Tech Rookie
Originally Posted by Centerfire
Actually you can use it Both! the only difference is the design and the weight!
04-13-2008, 08:56 AM
#957
Originally Posted by Martinst
Well I'm getting there, just waiting for the radio handset and receiver to come through the post and I can run the car. Got a Novak GTX and trinity monster to start me off.
Interesting to see how it compares to my TT-01, which is pretty well hopped up with diffs, one way etc. ( MRT Pro speedo is current away for service / repair )
MS
And my TT-01 ( 100 grams heavier than TA05ms )
Interesting to see how it compares to my TT-01, which is pretty well hopped up with diffs, one way etc. ( MRT Pro speedo is current away for service / repair )
MS
And my TT-01 ( 100 grams heavier than TA05ms )
04-13-2008, 09:25 AM
#958
Tech Adept
Originally Posted by E-clip
Hi
Could some please tell me what the part no# for the spacers that go under the toe blocks ??
Thanks mike
Could some please tell me what the part no# for the spacers that go under the toe blocks ??
Thanks mike
http://www.racingfactory.fi/shop/cat...2_0611_9fe.jpg
Part# 53932 for 0.5mm spacers
