R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric On-Road (https://www.rctech.net/forum/electric-road-2/)
-   -   What is the best touring chassis to start with? (https://www.rctech.net/forum/electric-road/157230-what-best-touring-chassis-start.html)

scarymonster 04-03-2007 09:41 AM

What is the best touring chassis to start with?
 
I'm gonna buy my first sedan chassis in a couple weeks and man! I can't make up my mind. I plan on doing indoor asphalt racing, probably won't go lipo+brushless for a while, most likely be using 19T. I've been saving so I have some Benjamins to spend. I already have the supporting electronics (radio, charger, power supply, etc.) and a chassis tuning stand. I just can't decide on which top-end chassis...they all seem kick ass! I'm asking the veterans out there to help me make a good decision based on reliability, ease of maintenance, and stock/hop-up parts availability. Here's my short list so help me decide!

Schumacher Mi3
Tamiya TRF 415 MSXX
Team Losi JRX-s Type R
Xray X2-007

I know that the Mi3 has been delayed until the end of April due some last minute problems with an outsourced part. I can wait. I just need feedback from experienced drivers to help me make a good decision on a chassis that will be fun to drive and maybe even win!

or8ital 04-03-2007 09:45 AM

Have you been racing TC for a while or are you just starting?

scarymonster 04-03-2007 09:50 AM

Just starting. I plan on racing at least once a week so the chassis will see lots of run time.

CAlbrecht 04-03-2007 09:56 AM

Your better off running what MOST guys would run at your local track, that way you will get the most help..The racers allways take care of there own..

sosidge 04-03-2007 09:57 AM

All those chassis are top class and have the potential to be competitive.

Parts availability is something only you can answer - which parts are on the local shelves?

Personally speaking out of those I would go for the Tamiya as an asphalt car, quality is excellent and the car is optimised for rubber tyres.

The Mi3 is unproven and unreleased although I am sure it will be competitive.

The Losi is perhaps more targetted at foam tyre racing and has a slighty chequered history although perhaps th Type R is the version that addresses those complaints.

The XRAY is a very popular car but I have to admit I am not a fan, and all the T2'007's I have seen locally seem to have fundamental handling issues (ie no rear grip) that I have never seen on an XRAY before, so I don't really know what is going on there.

Jake S 04-03-2007 10:09 AM

hurts not seeing the "tc5" in that list. i love my associated, what more can i say. im still running a tc3 converted with an irs chassis and stiffening kit, works well on carpet, and it was alot cheaper then a xray 007 lol

scarymonster 04-03-2007 10:28 AM

People run a variety of cars where I go: Tamiya, Yokomo, Xray, etc. One guy has an Mi3 on order and a couple guys do run the 415 MSXX. I really like the simplicity of the Mi3 chassis, it's clean and looks easy to work on. The MSXX has probably the most hop-ups available but I've heard it's not as easy to work on as say an Xray. The Xray is a little cheaper, but parts are a bit more expensive. I really like the way Team Losi has centered the battery tray and motor on the JRX-S Type R..they say that chassis handles corners at speed alot better than most and the track I'll be at is quite twisty. Sorry I didn't include the TC5..I'm also considering what I can buy locally (supporting the hobby!)...

SoCalMitch 04-03-2007 10:55 AM

I have had most of the cars on your list and they are all good cars.

Tamiya - Worked right out of the box with very little trouble. But the car gets a lot of slop in the parts quick and it gets out of tweak easy. Also the aluminum and Ti axles are too soft get steel ones.

X-Ray - One of the best engineered car on the market and the website support with their forums is great. This car works from the start and seams not to need too much attention on maintenance. The part I do not like on the car, but they work great, are the plastic shock bodies.

Losi JRXS-R - This car is amazing on how it is engineered and goes together easier than any kit I have put together. I have only had it a week an only ran it on foam carpet but it work really well with the stock setup. The bad part is that the parts supply and setup history is small right now but will not be an issue in the future.

scarymonster 04-03-2007 11:06 AM

Great feedback SoCalMitch! Good to know about the Tamiya. Are there aftermarket shock bodies for the Xray? I'm kinda leaning towards the JRXS-R right now, but want to wait until the Mi3 has been out a bit and see what kind of response it gets. The forum on Schumacher's website is full of crazy Brits just itching to get their hands on one...what about a Yokomo? I've heard great things about these cars. Looking at an MR4TC-BD...

Essnowyt 04-03-2007 11:33 AM

The best touring chassie to start with is the one you are most excited about.

Snowy.

PutAwayWet 04-03-2007 04:12 PM

I just started racing at my local track--Seattle Indoor Raceway--this January. Before I bought my first car, I was all stoked to get an X-Ray and a brushless motor and fire it up. But then I found out that the most popular class on my race night was GT3, or silver can, and that the chassis to get was the TA05. At first I thought that would be pretty lame. But as it turns out, the silver can class is really competitive, the cars are actually pretty fast, and I have learned A LOT since starting. And the TA05 is one tough mofo, which means a lot when you're just starting out as a club racer.

Maybe it will be different in a couple of years, but I plan on always having a silver can car to throw on the track. And it will probably be whatever is Tamiya's best tub racer. So for what's it worth, find out if your club races silver can, and consider the TA05. Especially since the TA05-R is coming out now.

Tsquare 04-03-2007 04:43 PM


Originally Posted by scarymonster
I'm gonna buy my first sedan chassis in a couple weeks and man! I can't make up my mind. I plan on doing indoor asphalt racing, probably won't go lipo+brushless for a while, most likely be using 19T. I've been saving so I have some Benjamins to spend. I already have the supporting electronics (radio, charger, power supply, etc.) and a chassis tuning stand. I just can't decide on which top-end chassis...they all seem kick ass! I'm asking the veterans out there to help me make a good decision based on reliability, ease of maintenance, and stock/hop-up parts availability. Here's my short list so help me decide!

Schumacher Mi3
Tamiya TRF 415 MSXX
Team Losi JRX-s Type R
Xray X2-007

I know that the Mi3 has been delayed until the end of April due some last minute problems with an outsourced part. I can wait. I just need feedback from experienced drivers to help me make a good decision on a chassis that will be fun to drive and maybe even win!

Of the cars you have listed, the Tamiya 415 chassis is the most proven race car on asphalt. I have raced the Tamiya 415TRF, 415TRF MS, TRF415 MSX. These cars are hard to beat on asphalt.

They are durable, but like any racing chassis, if you want to keep it competitive, you need to tear it down, clean the bearings and rebuild it. I have not driven the TRF415 MSXX, but my understanding is the chassis is 2mm vs 2.5mm used on the MSX. The thinner chassis should be better on asphalt, and if you start racing 5 cell instead of 6 cell packs, the car should prove to be even better.

Since this is your first sedan, you are most likely going to beat it down pretty quick while leaning to drive. A good idea is pick up a used TRF415 MSX, or what ever you fancy (very reasonable $200.00). After you improve your driving skills, then go and invest in a new car. Plus you will have a few bucks left in your pocket for tires, batteries and spare parts.

NOOB-SMOKE 04-03-2007 10:38 PM

007
 
Go the XRAY007,
Its the strongest touring car out there perfect for the new racer.
Set it up as kit setup and watch it fly
wwwwwhhhhhoooooo!! :nod:

nexxus 04-03-2007 10:56 PM

I dunno how many threads I have said this on, I had an X Ray, was a pain in the a... almost drove me to quitting, back to the TA05, I'm quicker, parts are cheaper and break less often.

ford_racing 04-03-2007 11:42 PM

Go for the one with the support at the club you intend to race at and an easy supply of parts, otherwise it can be hard.


All times are GMT -7. It is currently 07:04 PM.

Powered By: vBulletin v3.9.3.8
Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.