I need help!!!!!!
Hi people,
I'm just starting R/c racing with a 1/10th touring car, just after I brought it it came across me that I dont accually know what tools I need. Anyone have any suggestions? |
in my toolbox...
1.5mm hex driver 2mm hex driver 2.5mm hex driver 6mm nut driver 5mm nut driver 4mm nut driver (for the motor) precision screwdriver set pliers (long nose) hobby knife cutter wire cutter/stripper shrink tubes of various diameters double sided tape duct tape masking tape soldering gun solder CA glue (light) CA glue (heavy/medium) |
Originally Posted by racer man
Hi people,
I'm just starting R/c racing with a 1/10th touring car, just after I brought it it came across me that I dont accually know what tools I need. Anyone have any suggestions? the basic sae tools are (i have a tc4, t4, b4): hex wrenches .50" 1/16" 5/64" 3/32" 2.0mm 2.5mm normal phillips and slot screwdrivers socket nut drivers 3/16" 1/4" 11/32" I might be missing something. There are also scissors, pliers, calipers, etc.. but build as you go. Take a look at your local racers box.. and ask what you should get. That should get you started. Look at a variety of toolsets from the LOSI, ASSOCIATED, INTEGY, HUDY and even Dynamite (cheaper but good). good luck... |
Originally Posted by VooDooPH
in my toolbox...
1.5mm hex driver 2mm hex driver 2.5mm hex driver 6mm nut driver 5mm nut driver 4mm nut driver (for the motor) precision screwdriver set pliers (long nose) hobby knife cutter wire cutter/stripper shrink tubes of various diameters double sided tape duct tape masking tape soldering gun solder CA glue (light) CA glue (heavy/medium) |
quick fix on torn body shells... :)
also to shut my seatmate up if he's getting too annoying... or to tape my competitors car to the ceiling beams before the main heat... or to tape my competitor to his chair... duct tape is sooooooo useful! :sneaky: :lol: |
Originally Posted by VooDooPH
or to tape my competitors car to the ceiling beams before the main heat...
LOL If only I had thought of that earlier :nod: :ha: |
Obviuosly your most important tool is R/C tech. And dont forget your back up tool.
The hammer. :lol: |
All times are GMT -7. It is currently 11:49 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.