How to charge Sanyo 3300HV with Pulsar???
#1
How to charge Sanyo 3300HV with Pulsar???
I have Sanyo 3300HV cells... and charging with LRP Pulsar with peak detect at 20mV... after full discharge, I charge them at 5A .. surprisingly, the full charge capacity only reached at 3319mAh....my 3000HV will go up to 3300 too... could itb be caused by the peak detection or charging current??
Any advise?
Any advise?
#2
Tech Regular
iTrader: (2)
Hi SpeedDemon,
I have the LRP Pulsar comp but don't have the Sanyo 3300,
however here is the setting charge I use for GP3300 ;
Linear Charge
6 amps - Delta Peak 25mv
I usually have at the end of the charge around 3600+ mah (GP3300 Team Pack)
so I would say that your delta peak value is too low, the charge amps seems right.
Try 25mv delta peak and let me know if that improves.
I have the LRP Pulsar comp but don't have the Sanyo 3300,
however here is the setting charge I use for GP3300 ;
Linear Charge
6 amps - Delta Peak 25mv
I usually have at the end of the charge around 3600+ mah (GP3300 Team Pack)
so I would say that your delta peak value is too low, the charge amps seems right.
Try 25mv delta peak and let me know if that improves.