R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric On-Road (https://www.rctech.net/forum/electric-road-2/)
-   -   CDC Problems (https://www.rctech.net/forum/electric-road/134582-cdc-problems.html)

Fast XXXS 10-27-2006 04:00 AM

CDC Problems
 
Hi all,
I seem to be having problems with my CDC. It is the version 6.0. When i go to charge my packs up i set it for 6 amps for charging my 4200 but when i start it, it says its only putting in .11amps and wont go bach up to 6 amps. I have the same problem with my 2400 stick packs. This happens almost every time i charge a 2400 and it has happened twice when i was charging my 4200's which have only been charged once each by me.

Anyone else have this same problem?

Cheers

BrainTeased 10-27-2006 04:06 AM


Originally Posted by Fast XXXS
Hi all,
I seem to be having problems with my CDC. It is the version 6.0. When i go to charge my packs up i set it for 6 amps for charging my 4200 but when i start it, it says its only putting in .11amps and wont go bach up to 6 amps. I have the same problem with my 2400 stick packs. This happens almost every time i charge a 2400 and it has happened twice when i was charging my 4200's which have only been charged once each by me.

Anyone else have this same problem?

Cheers

Hey Luke

the reason why the cdc is only charging at .11 amps is because theres either one or more cells that have no capacity / energy / voltage in them. they have probably been sitting like that for a while so you might have to use a voltmeter and check out which cells are the cells with nothing in them and then use your novak charger and see if you can put some charge into those cells.

Fast XXXS 10-27-2006 05:11 AM

Thanks Heaps James,
I got the 4200's charged up with marks ICE Charger so they should be right, and i will charge the other stick packs up again.

Thankyou


All times are GMT -7. It is currently 05:09 AM.

Powered By: vBulletin v3.9.3.6
Content © 2001-2011 RCTech.net