surrealmaterial

iTrader: (4)

Hey guys,

just wondering is it ok to run a 55t/28t in a tt-01? or will it overload the motor. At the moment im running 55t/25t and everyone seems to be a little quicker down the straight. And if it is ok to run with anyone know were i can get a 28t pinion??


thanks

nikkiesteban

iTrader: (5)

btw what motor are you using??
i have here a gearing chart.. see pix..

nagatahawk

you can run the 28t pinion with the stock silver can motor. Tamiya does not make a 28t pinion. Kawada makes one but you will have to order it thru one of the Japaneses web sites the carries kawada.

It will got hot!!!

larrio

It would highly depend on the motor that you are running.

Try switching to aluminum or titanium screws to lighten the weight of the vehicle.

debon666

For my TT01 i use 61/22 (7.21) for drifting. And no heat problem for motor and esc. I use Mabuchi TUNED SPORT coz they say its economy stock motor

surrealmaterial

iTrader: (4)

im using a stock silver can motor...

surrealmaterial

iTrader: (4)

will my motor or esc get too hot?? ( i have a heatsink).. and also is the pinion/spur 48pitch?

thanks

lceriyirri

I ordered 24/25 poion gears and 55 58 61 surp gear, and I realize that I can't take my poion gear off from the silver can. will I need to remove it by force?

tyler_drift

just wanna ask if i can use a 22P/61S for my tt01 with 15t motor? thnx

surrealmaterial

iTrader: (4)

yeah u can...check out pic....

tyler_drift

thnx....

surrealmaterial

iTrader: (4)

has anyone used a 28t/55t on there tt-01?? And if so..how did it run...did the esc or motor get too hot???

Thanks