R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric On-Road (https://www.rctech.net/forum/electric-road-2/)
-   -   GP4300 (https://www.rctech.net/forum/electric-road/130642-gp4300.html)

Johnny Wishbone 09-25-2006 02:30 PM

GP4300
 
Thinking of trying some GP4300. What is the reconmended discharge and storage for these cells? Is it different than the IB3800/4200? (Tray to .90 volts per cell.) Thanks.

Johnny Wishbone 09-25-2006 05:49 PM

GP4300
 
Are you guys dead shorting these packs? Come on, somebody must have some legitimate suggestions.....................Bueler.........ple ase.

James khoo 09-25-2006 08:00 PM

Hi there,
I had using those cells wthout any problems.
just follow steps below;
1.When new,charge those cell at 5A for 500 second,then put on discharge tray till the light go off.The cells is good to use for race.
2.When charge,use voltage cutt off of 3mv/cell(or temp.45 degree)at 6 amp.
3.Discharge your cells at 30 amp.cut off 0.9v then put on discharge tray till light off.
4.Storage,less than a week,just discharge 30 amp 0.9v cut off,your cells will be ok.More the a week,after discharge at 30 amp.put 500 second of charge in,then store.
Hope this help

Cheers

Johnny Wishbone 09-25-2006 11:02 PM

GP4300
 
Thanks James. JW


All times are GMT -7. It is currently 05:14 AM.

Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.