Will this body fit my R/C car?
09-13-2006, 02:22 PM
#1
Will this body fit my R/C car?
Will this body fit my R/C car? I have a Tamiya 1/10th Volvo 850 BTCC R/C car. But I want to know if this FLASH body will fit the R/C car? Thanks
Volvo s40 Flash Body
Volvo s40 Flash Body
Last edited by BTCC Collector; 09-13-2006 at 02:45 PM.
09-13-2006, 02:33 PM
#2
BUMP
09-13-2006, 02:45 PM
#4
Try this one and the one in first post is fixed too.
http://www.minirccar.com/index.asp?P...ROD&ProdID=130
http://www.minirccar.com/index.asp?P...ROD&ProdID=130
09-13-2006, 02:47 PM
#5
Rob
If it is 200mm it should fit
If it is 200mm it should fit
09-13-2006, 02:48 PM
#6
If those links don't work try this one.
And look for the Volvo s40 body.
http://www.minirccar.com/index.asp?P...TS&Category=45
And look for the Volvo s40 body.
http://www.minirccar.com/index.asp?P...TS&Category=45
09-13-2006, 02:54 PM
#7
Originally Posted by oldnitro
Rob
If it is 200mm it should fit
If it is 200mm it should fit
09-13-2006, 03:03 PM
#8
It says it fits the CEN CT4-S which is a nitro car. Nitro cars run 200mm width. Your Volvo is a Tamiya TA-02 FF which is about 185mm. The body will fit but with some gap on the sides. To make-up for the gap use deeper offset wheels. Check HPI, they have 3mm-6mm offsets on the wheels they offer.
09-13-2006, 03:11 PM
#9
Originally Posted by YR4Dude
It says it fits the CEN CT4-S which is a nitro car. Nitro cars run 200mm width. Your Volvo is a Tamiya TA-02 FF which is about 185mm. The body will fit but with some gap on the sides. To make-up for the gap use deeper offset wheels. Check HPI, they have 3mm-6mm offsets on the wheels they offer.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
