who makes this body ???
 

http://www.rctech.net/forum/attachme...hmentid=163755

i would like to get a FORD pick-up truck body like this for my JRXS, does any body no which one this is ??, i looked around and seen that HPI has a few but not sure if it's a HPI body and what is the difference when running a 200mm body on a 190mm body car

and also this HPI body says, "This 200mm wide body is perfect for any wide electric Touring Car " so does that mean it would be fine on a 190mm car ?
http://www.hpiracing.com/graphics/bodies/7408_01m.jpg


:confused: :confused: :confused:
any help/info would be great
thanks

HPI makes it. You can find it in the 200mm body list on their website. It will fit fine on a 190mm sedan. The wheels will just be set in a little.


Frewer makes a simlar body called the F-155. You can get it from Schumacher USA.

thank you sir


but can you give me anymore info on the other ???'s

like 200mm on a 190mm car ?


"edit" was posting while you added some info


thanks again, i will look into that other body

i looked on the schumacher site but can't seem to get a pic of it :cry:

I'm scratching my head on this one..

Why would you look on the schumacher site?

HPI sells body for $22 dollars. Looks like it is in stock.

Frewer F155 body on my TC3 (190mm) with 3mm offset wheels.
I've had this body for a few years now, I ran it on my Mission even :lol:

http://img.photobucket.com/albums/v6...adnz/rb-LF.jpg

http://img.photobucket.com/albums/v6...adnz/rb-RR.jpg

:confused:

i looked on the schumacher site because he said you can get it from them and i have never seen that body he mentioned before and wanted to have a look and check it out and figured if they sold it they would have pics on there site and if i liked it better then maybe i would order it instead of the HPI one, i hope that is ok now that i explained myself to you :rolleyes:


thanks for the help guys

I will be the first to say the Schumacher Website is far from perfect. Unfortuntnatly it is run by Schu UK so there is nothing I can do about it.

THe Frewer F-155 is part number FR21 in the US. It sell for $21.99 and we have it in stock now.

http://www.racing-cars.com/usa/image...on21_truck.jpg

I run a 200mm HPI shell on my sprint 2 Drifter, which is 190mm , but I use 6mm offset speedway pal rims and they fill the guards perfectly,http://f10.putfile.com/main/8/22700562826.jpg

or alternatively you could use wider hex adapters and thinner nuts to achieve some off set http://www.rcmart.com/catalog/produc...ducts_id=15006

That's IMHO putting it mildly. :smile:


Mr. Shep.
Protoform, HPI and Parma all have Ford 150 body. Try looking at the truck bodies in you LHS, you might find some that fit your car.

i guess i will be getting more than one :nod:



thanks for all the help guys