52LikesTeam Losi JRXS Type-R
08-10-2009, 04:34 PM
08-10-2009, 04:47 PM
The Executive committee has approved the following rules deviation recommendation from the Electric On Road Class Committee.
Rule 8.10.5.1 minimum weight for T2 Touring Car has been deviated for the Electric On Road Paved Nationals, Hobby Town USA - Frederick, Oct. 1st - 4th. The min T2 Touring Car weight to be used for this event wil be "1420grams / 50Oz /3.125LB"
I think we need to look more hard for a new layout on the chassisLosi car is awesome for this rule..Most cars have lipo wt on r/s under battery..Losi I went from steel tray to plastic tray and was exactally 1422, That is with 42 grams of lead still on car......
08-10-2009, 05:16 PM
I think I can be right on 1420 this weekend at Jackson.
I dont know what Xray, HB, Tamiya, AE TOP will / can do ...hahah
Long Live Losi! (aka Horizon hobby distributor
)
Last edited by SweepRacingUSA; 08-10-2009 at 05:27 PM.
08-10-2009, 05:38 PM
I've been thinking about getting a JRXS, but have a question. I have 2 Lipos that are like this:
http://www.promatchracing.com/proddetail.php?prod=2506
My concern is the balance taps and the main leads woun't fit past the chassis top plate. Do you guys have any insight as to wether or not my packs will fit?
http://www.promatchracing.com/proddetail.php?prod=2506
My concern is the balance taps and the main leads woun't fit past the chassis top plate. Do you guys have any insight as to wether or not my packs will fit?
08-10-2009, 06:12 PM
I know I quoted myself, but the answer that I got was not exactly what I was looking for. My packs are like the ones in the link in the quote. With the packs I have will the leads clear the edges of the top plate? The only pictures I can find of the JRSX with Lipos in it are packs with a lead in each corner of the pack. Do you guys think my packs could fit in the JRSX?
08-10-2009, 06:17 PM
I am running SMC batteries in the type R. The balnce tap and the power wires come out of the same corner of the battery. This fits the type R due to the "notches" in the front of the top plate. These notches can be dremeled a bit if need be for clearance. Actually the batteries pictured in the link would probably fit better than mine since the lead wires and balance tap are on opposite corners. Now for thickness or width I don't know on that particular battery but the wires should fit okay.
08-10-2009, 06:26 PM
08-10-2009, 06:37 PM
08-10-2009, 06:45 PM
Yeah no kidding, i've seen him turn faster lap times than me with three wheels.
Layshafts and Spools are IN STOCK! back orders will be filled tmrw.
Pablo Diablo did a great job on these spools!!
I ordered a crapton load of the outdrive ends and exactly NONE has shown up yet
. If you guys will bear with me i will post them asap, or you can go through your local shop, stormer i've seen them for 5.95@.
Layshafts and Spools are
IN STOCK! back orders will be filled tmrw. Pablo Diablo did a great job on these spools!!
I ordered a crapton load of the outdrive ends and exactly NONE has shown up yet
. If you guys will bear with me i will post them asap, or you can go through your local shop, stormer i've seen them for 5.95@.
Last edited by YmeBP; 08-10-2009 at 08:01 PM.
08-10-2009, 06:49 PM
Not seeing the spool listed on the site. Will it be listed on the site tonight?
Last edited by jkirkwood; 08-10-2009 at 06:51 PM. Reason: added question.
08-10-2009, 07:24 PM
Give me like 30 minutes to post. You have an order in for a shaft already too don't you?
08-10-2009, 07:26 PM
08-10-2009, 07:30 PM
Layshafts and Spools are IN STOCK! back orders will be filled tmrw.
Pablo Diablo did a great dob on these spools!!
I ordered a crapton load of the outdrive ends and exactly NONE has shown up yet. If you guys will bear with me i will post them asap, or you can go through your local shop, stormer i've seen them for 5.95@.
IN STOCK! back orders will be filled tmrw. Pablo Diablo did a great dob on these spools!!
I ordered a crapton load of the outdrive ends and exactly NONE has shown up yet
. If you guys will bear with me i will post them asap, or you can go through your local shop, stormer i've seen them for 5.95@.
bring me 2 of spool 2 of shaft this Saturday. PLZ~
08-10-2009, 07:57 PM
Anyone have a 17.5 Redline/RS setup they'd like to share. I'm soldering tomorrow, the rest is already in the car. I'd at least like a ballpark starting gear ratio. I'm running a 118 spur and have a 43 tooth pinion in it. I'm thinking I need to drop the FDR just a little.
08-10-2009, 08:00 PM
