jrp

iTrader: (19)

That LOSI pack works really well. And drops right in the Type R.

MikeXray

iTrader: (73)

http://www.rctech.net/forum/electric...ml#post4729000

here is a post I made on how to widen the pulleys, it's not a big deal and will open your possibilities. You don't have to buy new lipos every 2 months like nimh so you might as well get a good pack from the start.

lidebt2

iTrader: (21)

check your link

a_main_attendee

iTrader: (2)

Check your PC because it works on mine.

MaxRain

iTrader: (2)

Get excited guys, the new and improved version is coming..

Here is screen shot..

Yub, yub, cmdr!

Do you know what are the most commonly used springs on this car? I don't want to buy springs I won't ever use.

dgullickson

iTrader: (45)

If anyone is in need of thrusts or ceramic balls, we are having a buy 1 get 1 free, + free shipping + you can use reward points to save more money

http://www.axiommotors.com/ceramic-b...ngs-c-113.html

sickjamminracer

iTrader: (23)

does anybody know if the orion 3800 fits in without any modifying??

a_main_attendee

iTrader: (2)

What would you use the car for? for rubber tire a set of 12.5's/15's/17.5s/20's should be around where you should be, a bit higher for foam.

You have to widen the pullies and i beleive dremel the bulkhead a little. I'm not too sure though.

JoelV

iTrader: (4)

David, for foam the car comes with 30 and 17.5 which work great. On occasion I've only really changed to 15lb rear springs. So If you run foam, really you don't need to get anymore, but I find the only thing that usually varies from my base setup is rear shock spring depending on layout.

sickjamminracer

iTrader: (23)

what lipos fit without any modding??

sickjamminracer

iTrader: (23)

ive seen a few people run the ib 3800 does anybody use this pack in ther type r ?? if so does it require any modding??

a_main_attendee

iTrader: (2)

The old orions (3200/4800), the losi lipos (5000 20c/4400 30c)

Those are for sure able to fit, i beleive the trakpower 4900 fits as well as the older 28c SMC 4000, but i'm not 100% sure...

sickjamminracer

iTrader: (23)

my pack is

Length: 136mm (5.3")
Width: 47mm (1.85")
Height: 22mm (0.87")


i cant find the measurements on the losi lipos to compare the two

a_main_attendee

iTrader: (2)

Another thing to consider would be the location of the leads coming from the pack, most top-exiting leads won't work, but most bullet connecter holes will.

I'll measure my chassis and orion batt to give ya an idea of space needed. I'll be back.