Team Losi JRXS Type-R
#7156
Tech Adept
iTrader: (8)
Thanks for the replys on the Lipo fit issue guys. I'll show this page to my buddy. I only have 2 battery packs right now and one of them is a Racers Edge 5000 with a hard case... I'm thinking of letting him try it to see what happens...
The Trakpower 4900 is the gold one right?
The Trakpower 4900 is the gold one right?
#7157
Thanks for the replys on the Lipo fit issue guys. I'll show this page to my buddy. I only have 2 battery packs right now and one of them is a Racers Edge 5000 with a hard case... I'm thinking of letting him try it to see what happens...
The Trakpower 4900 is the gold one right?
The Trakpower 4900 is the gold one right?
#7158
Ok, so here's what my car is currently looking like. Dont laugh at the crappy camera phone pics, I'm holding out for a Nikon DSLR.
Speed Passion GT 1.1, 17.5, supercap, Futaba BLS451, etc. and its still a drift car. Went to the track today, I'm thoroughly convinced that its just too light. I've got some Lipo Lead on the way so I'm hoping that might improve things.
Speed Passion GT 1.1, 17.5, supercap, Futaba BLS451, etc. and its still a drift car. Went to the track today, I'm thoroughly convinced that its just too light. I've got some Lipo Lead on the way so I'm hoping that might improve things.
#7160
Not literally. It just looks like I'm drifting around the track because my car is not dialed yet.
#7161
Nobodylikesmy car.
#7162
Tech Addict
iTrader: (8)
I know it is hard to wire this car, but has anybody came up with a nice clean wire job? When I had my standard JRXS I shoe good a piece of heat shrink tubing to the chassis and used it like a piece of conduit for my wires. Made the car look really clean wihtout haveing wires poping out all over the place. I will look for a picture of it maybe I can find it.
RedRocket
RedRocket
#7163
Whats wrong with mine up above there?
#7164
What about my radio, no good?
#7168
You're funny dude. If the wires hanging off the side bothers you, this guys doesnt look too bad. I know I can do a better job with mine, but priority numero uno is to get the handling set first.
Go back to post #6498 and you can see it better.
Go back to post #6498 and you can see it better.
#7169
Tech Fanatic
iTrader: (7)
Join Date: Feb 2005
Location: Gatineau, QC, Canada (beside Ottawa)
Posts: 818
Trader Rating: 7 (89%+)
Have a look to this page, http://www.petitrc.com/view_news.php?id=4620 , you may find information!
#7170
Rapid fire question time. 1) Whats the deal with the one dot and two dots on the shock tops? All four of my shocks have only one dot. The manual says one dot goes on one side and two dots on the other. Since all four of mine are the same I think I'm okay, but I would still like to know what the difference is?
2) Does MIP make CVD's that fit the Type R? These LCD's are about the most jank thing that I've seen. I have rebuilt the LCD's twice, and both times I have had to mix and match old parts with new, assemble, disassemble, then reassemble because of them either binding or being too sloppy. I dont run a spool so I dont care about the chatter they may eliminate. With MIP's, you open the bag, put em together and you're done. All techno-babble aside, you tell me which one looks more solid?
3) How cool would your Type R look if you did this to it?
I've seen an Xray with green anodized aluminum, but never a Losi.
2) Does MIP make CVD's that fit the Type R? These LCD's are about the most jank thing that I've seen. I have rebuilt the LCD's twice, and both times I have had to mix and match old parts with new, assemble, disassemble, then reassemble because of them either binding or being too sloppy. I dont run a spool so I dont care about the chatter they may eliminate. With MIP's, you open the bag, put em together and you're done. All techno-babble aside, you tell me which one looks more solid?
3) How cool would your Type R look if you did this to it?
I've seen an Xray with green anodized aluminum, but never a Losi.