The New F206F1 From MLP Motorsports
12-16-2006, 02:32 AM
#346
I have sold 8 of these and 5 others will be getting the New F207F1 It is a much better car and it has the drive train of our X10P4 V2 Touring car there is a lay out on it on the website F1 button the F207F1 button and then click on the Red Bar to move to the next page and so on ok.
Last edited by Marty Peterson; 08-03-2008 at 01:40 PM.
12-16-2006, 03:52 AM
#347
Hello Marty,
YGPM
YGPM
12-21-2006, 12:16 AM
#350
Well Big Boss Drivetrain is done Lower Chassis is Done Suspension is done front upper Chassis is being made as well as the rear upper Chassis plate.
Waiting on belts for this car and then I will finish it off post pics and ship these 5 I am working on right now!
And then I will only have 3 order left to ship! the following week I would say and then we will close for 30 days or so ok everyone! we will re-open around Feb 15th 2007.
Ok I did not want to do this but here is a pic of it right now remember the front suspension hangs off of the front upper Chassis and not the lower ok
Plus I thought I would toss in a picture of 2 cars that shipped this week!
You know who you are that are getting these! LOL.
Waiting on belts for this car and then I will finish it off post pics and ship these 5 I am working on right now!
And then I will only have 3 order left to ship! the following week I would say and then we will close for 30 days or so ok everyone! we will re-open around Feb 15th 2007.
Ok I did not want to do this but here is a pic of it right now remember the front suspension hangs off of the front upper Chassis and not the lower ok
Plus I thought I would toss in a picture of 2 cars that shipped this week!
You know who you are that are getting these! LOL.
Last edited by Marty Peterson; 08-03-2008 at 01:40 PM.
12-21-2006, 12:56 AM
#351
F201 side-by-side status
Marty,
Any update with my side-by-side chassis? You also still have my saddle F201. Please send it back with the new chassis. You said you would have it mailed out after Monday of this week. Can you give me an order update. Would love to have it before 12-29-06 so I can race it during my vacation.
Thanks,
Fernando
Any update with my side-by-side chassis? You also still have my saddle F201. Please send it back with the new chassis. You said you would have it mailed out after Monday of this week. Can you give me an order update. Would love to have it before 12-29-06 so I can race it during my vacation.
Thanks,
Fernando
12-21-2006, 01:53 AM
#352
I sent you an email on this I will not do this here or on ebay!
Plus all F201 Question should be posted here
http://www.rctech.net/forum/showthread.php?t=133705
or Here
http://www.rctech.net/forum/showthre...8&page=6&pp=30
Plus all F201 Question should be posted here
http://www.rctech.net/forum/showthread.php?t=133705
or Here
http://www.rctech.net/forum/showthre...8&page=6&pp=30
Last edited by Marty Peterson; 12-21-2006 at 02:19 AM.
12-21-2006, 02:24 AM
#353
Well I just got an email from the people I get carbon fiber from they are not shipping anything else out till after Jan 5th 2007 So after this run of cars we will be done till Feb 15th 2007 ok.
No more orders!
website has been updated and I will update it about every 3 to 5 days and you will need to go there for your info ok.
I will pm everyone that has orders there tracking numbers from now till the last order is gone ok.
Happy Holidays everyone and a happy New Year!
Now it is 3:15 am and I work again in the morning and will not be back till after 7 pm when I get home so get all your question lined up only a few days left till our Brake!
Please post question on MLP Cars in there respective Threads
Thank you and or in Company Thread ok.
No more orders!
website has been updated and I will update it about every 3 to 5 days and you will need to go there for your info ok.
I will pm everyone that has orders there tracking numbers from now till the last order is gone ok.
Happy Holidays everyone and a happy New Year!
Now it is 3:15 am and I work again in the morning and will not be back till after 7 pm when I get home so get all your question lined up only a few days left till our Brake!
Please post question on MLP Cars in there respective Threads
Thank you and or in Company Thread ok.
01-08-2007, 09:15 AM
#357
Originally Posted by Marty Peterson
Well Big Boss Drivetrain is done Lower Chassis is Done Suspension is done front upper Chassis is being made as well as the rear upper Chassis plate.
Waiting on belts for this car and then I will finish it off post pics and ship these 5 I am working on right now!
And then I will only have 3 order left to ship! the following week I would say and then we will close for 30 days or so ok everyone! we will re-open around Feb 15th 2007.
Ok I did not want to do this but here is a pic of it right now remember the front suspension hangs off of the front upper Chassis and not the lower ok
Plus I thought I would toss in a picture of 2 cars that shipped this week!
You know who you are that are getting these! LOL.
Waiting on belts for this car and then I will finish it off post pics and ship these 5 I am working on right now!
And then I will only have 3 order left to ship! the following week I would say and then we will close for 30 days or so ok everyone! we will re-open around Feb 15th 2007.
Ok I did not want to do this but here is a pic of it right now remember the front suspension hangs off of the front upper Chassis and not the lower ok
Plus I thought I would toss in a picture of 2 cars that shipped this week!
You know who you are that are getting these! LOL.
http://www.rctech.net/forum/attachme...hmentid=189530
01-10-2007, 10:33 PM
#359
F207 Pics
Hello Hi everyone
Hi Big!
Here are some pictures ok.
Front shock mounts are almost done should be by Friday.
I hope the belts are here by then.
Frist it is shown with the stock F201 Shocks on it but the car will come with Aluminum Shocks. Aluminum arms. Aluminum Steering horn. I am also making this week my own CVD's the cars will also have these if it works out.
The front suspension is mounted to the upper deck just like the F206 but I have worked out all of the bump steer it had.
The Chassis has 2 upper parts to it now.
The F206 would flex and grind the spur gear down there was no way to fix it this is one reason we came out with the F207 The other reason The F206 was fast but a hand full in slow speed corners I feel moving the motor forward and the batteries back will help fix this as well.
We now have bettery slots 6 on the right and 3 on the left to give you any setup you my want.
I am sure all of you waiting on this car will be very happy The people that ordered the F206 and did not get there car Well this is why.
To Re-design a car and fix things is hard but I feel this car will work great.
I ran it for 4 hours no-stop with my 7T hooked up to my motor dyno there were no problems found. I am just getting over having walking Nomonia and I have not had a chance the run it outside. But I will this weekend.
We have been closed and will re-open feb15th I will strat shipping these cars ASAP. it will be the only thing I will be working on till the last car ships.
Please Hang in there ok.
Thank you Marty.
Hi Big!
Here are some pictures ok.
Front shock mounts are almost done should be by Friday.
I hope the belts are here by then.
Frist it is shown with the stock F201 Shocks on it but the car will come with Aluminum Shocks. Aluminum arms. Aluminum Steering horn. I am also making this week my own CVD's the cars will also have these if it works out.
The front suspension is mounted to the upper deck just like the F206 but I have worked out all of the bump steer it had.
The Chassis has 2 upper parts to it now.
The F206 would flex and grind the spur gear down there was no way to fix it this is one reason we came out with the F207 The other reason The F206 was fast but a hand full in slow speed corners I feel moving the motor forward and the batteries back will help fix this as well.
We now have bettery slots 6 on the right and 3 on the left to give you any setup you my want.
I am sure all of you waiting on this car will be very happy The people that ordered the F206 and did not get there car Well this is why.
To Re-design a car and fix things is hard but I feel this car will work great.
I ran it for 4 hours no-stop with my 7T hooked up to my motor dyno there were no problems found. I am just getting over having walking Nomonia and I have not had a chance the run it outside. But I will this weekend.
We have been closed and will re-open feb15th I will strat shipping these cars ASAP. it will be the only thing I will be working on till the last car ships.
Please Hang in there ok.
Thank you Marty.
Last edited by Marty Peterson; 08-03-2008 at 01:39 PM.
