268LikesCK25AR 1/12th car kit from Team CRC
10-28-2022, 02:12 PM
#258
Originally Posted by DesertRat
Probably in the slow heat at PF. I'll let you go by.
10-28-2022, 02:18 PM
#259
Originally Posted by DesertRat
I wish it was carpet. This place has arage floor sealant, but it's better than nothing.
10-28-2022, 02:22 PM
#260
Originally Posted by old_dude
If you are on carpet you will need to cut those tires down a bit!
10-28-2022, 02:39 PM
#261
I did not notice the adaptor- which I also have.Thanks for the quick response.
10-29-2022, 08:44 PM
#262
Originally Posted by davidl
How do you like the Lowrider?
Rollout of 68, not quite 40 degrees of timing on the endbell, it had some scoot.
Overall I had a frustrating race day, not because of the car, but because of the relationship between tires, the garage floor epoxy track, and consistency. The car showed flashes of brilliance, I ran multiple fast practice laps of 9.1s on a layout where the fastest laps turned by other racers in the class and layout were 8.9s, and it still had some left in it, but the track surface bites you when your prep is anything less than exactly right.
Don't take your carpet track for granted.
10-31-2022, 04:33 PM
#263
Tech Master
iTrader: (26)
Originally Posted by DesertRat
It wasn't giving up ground on the track to any other 13.5.
Rollout of 68, not quite 40 degrees of timing on the endbell, it had some scoot.
Overall I had a frustrating race day, not because of the car, but because of the relationship between tires, the garage floor epoxy track, and consistency. The car showed flashes of brilliance, I ran multiple fast practice laps of 9.1s on a layout where the fastest laps turned by other racers in the class and layout were 8.9s, and it still had some left in it, but the track surface bites you when your prep is anything less than exactly right.
Don't take your carpet track for granted.
Rollout of 68, not quite 40 degrees of timing on the endbell, it had some scoot.
Overall I had a frustrating race day, not because of the car, but because of the relationship between tires, the garage floor epoxy track, and consistency. The car showed flashes of brilliance, I ran multiple fast practice laps of 9.1s on a layout where the fastest laps turned by other racers in the class and layout were 8.9s, and it still had some left in it, but the track surface bites you when your prep is anything less than exactly right.
Don't take your carpet track for granted.
11-05-2022, 07:57 PM
#264
Who makes fancy 3D printed bumpers for rubber tires gt12 for the ck25 ar
11-28-2022, 04:01 PM
#266
Looking foward to the new kits!
11-28-2022, 06:21 PM
#268
Originally Posted by vafactor
Hmmmmm. Were there any slender car(s) being run at Cleveland?
11-30-2022, 08:19 AM
#269
Originally Posted by mjordan44847
Who makes fancy 3D printed bumpers for rubber tires gt12 for the ck25 ar
11-30-2022, 08:22 AM
#270
Would still like to find some set ups for the ck25. If you have any please dm me as search does not seem to be working for me on this so again. Thanks
